This study presents the optimization of the friction stir welding (FSW) process using polynomial regression to predict the maximum tensile load (MTL) of welded joints. The experimental design included varying spindle speeds from 600 to 2200 rpm and welding speeds from 100 to 350 mm/min over 28 experimental points. The resulting MTL values ranged from 1912 to 15,336 N. A fifth-degree polynomial regression model was developed to fit the experimental data. Diagnostic tests, including the Shapiro-Wilk test and kurtosis analysis, indicated a non-normal distribution of the MTL data. Model validation showed that fifth-degree polynomial regression provided a robust fit with high fitted and predicted R values, indicating strong predictive power. Hill-climbing optimization was used to fine-tune the welding parameters, identifying an optimal spindle speed of 1100 rpm and a welding speed of 332 mm/min, which was predicted to achieve an MTL of 16,852 N. Response surface analysis confirmed the effectiveness of the identified parameters and demonstrated their significant influence on the MTL. These results suggest that the applied polynomial regression model and optimization approach are effective tools for improving the performance and reliability of the FSW process.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3390/ma18020448 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The Application of Supervised Machine Learning Algorithms for Image Alignment in Multi-Channel Imaging Systems.
Sensors (Basel)
January 2025
Department of Computer-Integrated Technologies of Device Production, Faculty of Instrumentation Engineering, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Beresteiskyi Ave., 37, 03056 Kyiv, Ukraine.
This study presents a method for aligning the geometric parameters of images in multi-channel imaging systems based on the application of pre-processing methods, machine learning algorithms, and a calibration setup using an array of orderly markers at the nodes of an imaginary grid. According to the proposed method, one channel of the system is used as a reference. The images from the calibration setup in each channel determine the coordinates of the markers, and the displacements of the marker centers in the system's channels relative to the coordinates of the centers in the reference channel are then determined.
View Article and Find Full Text PDFResearch on the Classification of Traditional Building Materials in Southern Fujian Using the Reflection Intensity Values of Ground-Based LiDAR.
Sensors (Basel)
January 2025
Department of Civil Engineering and Engineering Management, National Quemoy University, Kinmen 89250, Taiwan.
Ground-based LiDAR technology has been widely applied in various fields for acquiring 3D point cloud data, including spatial coordinates, digital color information, and laser reflectance intensities (I-values). These datasets preserve the digital information of scanned objects, supporting value-added applications. However, raw point cloud data visually represent spatial features but lack attribute information, posing challenges for automated object classification and effective management.
View Article and Find Full Text PDFImage-Driven Hybrid Structural Analysis Based on Continuum Point Cloud Method with Boundary Capturing Technique.
Sensors (Basel)
January 2025
Department of Civil Engineering, Myongji College, Seoul 03656, Republic of Korea.
Conventional approaches for the structural health monitoring of infrastructures often rely on physical sensors or targets attached to structural members, which require considerable preparation, maintenance, and operational effort, including continuous on-site adjustments. This paper presents an image-driven hybrid structural analysis technique that combines digital image processing (DIP) and regression analysis with a continuum point cloud method (CPCM) built on a particle-based strong formulation. Polynomial regressions capture the boundary shape change due to the structural loading and precisely identify the edge and corner coordinates of the deformed structure.
View Article and Find Full Text PDFFSW Optimization: Prediction Using Polynomial Regression and Optimization with Hill-Climbing Method.
Materials (Basel)
January 2025
Mechanical and Electrical Engineering Department, Polish Naval Academy, 81-103 Gdynia, Poland.
This study presents the optimization of the friction stir welding (FSW) process using polynomial regression to predict the maximum tensile load (MTL) of welded joints. The experimental design included varying spindle speeds from 600 to 2200 rpm and welding speeds from 100 to 350 mm/min over 28 experimental points. The resulting MTL values ranged from 1912 to 15,336 N.
View Article and Find Full Text PDFFatigue Life Prediction of FRP-Strengthened Reinforced Concrete Beams Based on Soft Computing Techniques.
Materials (Basel)
January 2025
Department of Civil Engineering, School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China.
This paper establishes fatigue life prediction models using the soft computing method to address insufficient parameter consideration and limited computational accuracy in predicting the fatigue life of fiber-reinforced polymer (FRP) strengthened concrete beams. Five different input forms were proposed by collecting 117 sets of fatigue test data of FRP-strengthened concrete beams from the existing literature and integrating the outcomes from Pearson correlation analysis and significance testing. Using Gene Expression Programming (GEP), the effects of various input configurations on the accuracy of model predictions were examined.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!