Bending Performance of Diamond Lattice Cylindrical Shells.

The Diamond lattice cylindrical shell (Diamond LCS) was proposed by a mapping approach based on the triply periodic minimal surfaces (TPMS). The finite element models were built and their accuracy was verified by experimental results. Parameter studies were carried out to investigate the effect of geometric and loading parameters on the bending properties of the Diamond LCSs by the finite element model. The results show that Diamond LCS has a stable "V" deformation pattern under a three-point bending load. In the range of relative density () = 15-30%, the higher the , the better the lateral bending performance of the Diamond LCS structure. The larger the variation radial coefficient, the higher the lateral load-carrying capacity of the structure. The smaller the loading angle of the punch, the better the lateral bending performance of the Diamond LCS structure. However, if the loading angle is too small, the structure is prone to large torsional deformation, and the deformation tends to destabilize. The increase in punch diameter effectively improves the deformation pattern and bending energy absorption characteristics of the structure. The smaller the span of the cylindrical support, the better the bending energy absorption characteristics of the structure.