This paper presents a W-band power amplifier monolithic microwave integrated circuit (MMIC) that is designed for high-precision millimeter-wave systems and fabricated using a 0.1 µm GaAs pHEMT process. The amplifier's stability was evaluated using the network determinant function, ensuring robust performance under both linear and nonlinear conditions. Simultaneous matching for gain and output power was achieved with minimal passive elements. The developed power amplifier MMIC exhibits a linear gain exceeding 20 dB and an input return loss greater than 6 dB across the 88-98 GHz range. It delivers an output power of 23.8-24.1 dBm with a power gain of 17.3-17.9 dB in the 88-97 GHz range and achieves a maximum power-added efficiency (PAE) of 24% at 94 GHz.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3390/mi16010081 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High-Performance Mechano-Sensitive Piezoelectric Nanogenerator from Post-Treated Nylon-11,11 Textiles for Energy Harvesting and Human Motion Monitoring.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Henan Key Laboratory of Advanced Nylon Materials and Application, Zhengzhou University, Zhengzhou 450001, China.
Piezoelectric polymer textiles offer distinct advantages in the fabrication of wearable nanogenerators (NGs). One effective strategy to enhance the output capacity of NGs is to modulate the piezoelectric performance of the textiles. This paper focuses on further improving the piezoelectric properties of nylon-11,11 textiles through post-drawing and annealing treatments.
View Article and Find Full Text PDFStudies on the High-Power Piezoelectric Property Measurement Methods and Decoupling the Power and Temperature Effects on PZT-5H.
Sensors (Basel)
January 2025
School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
For those piezoelectric materials that operate under high-power conditions, the piezoelectric and dielectric properties obtained under small signal conditions cannot be directly applied to high-power transducers. There are three mainstream high-power characterization methods: the constant voltage method, the constant current method, and the transient method. In this study, we developed and verified a combined impedance method that integrated the advantages of the constant voltage and current methods, along with an improved transient method, for high-power testing of PZT-5H piezoelectric ceramics.
View Article and Find Full Text PDFNovel Class-AB Operational Amplifier for Compact and Energy-Efficient Wake-Up Sensor Systems.
Sensors (Basel)
January 2025
Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran 31261, Saudi Arabia.
This paper presents a novel rail-to-rail Class-AB operational amplifier tailored for wake-up systems in motion sensor applications. By addressing limitations in free Class-AB designs, such as large inrush current, unstable bias conditions, and area ineffiiency, the proposed design achieves a gain of 59 dB and unity gain frequency of 550 kHz driving a 5 pF load. The inrush current is reduced from 1 mA to 7 µA, increasing the battery life.
View Article and Find Full Text PDFThe Effect of Relative Humidity on Creep Behavior of Cement Paste Microprism.
Materials (Basel)
January 2025
Department of Civil Engineering, Laval University, Québec City, QC G1V 0A6, Canada.
Despite decades of extensive studies, the mechanism of concrete creep remains a subject of debate, mainly due to the complex nature of cement microstructure. This complexity is further amplified by the interplay between water and the cement microstructure. The present study aimed to better understand the creep mechanism through creep tests on microprisms of cement paste at hygral equilibrium.
View Article and Find Full Text PDFDesign of Interface ASIC with Power-Saving Switches for Capacitive Accelerometers.
Micromachines (Basel)
January 2025
College of Electrical and Electronic Engineering, Wenzhou University, Wenzhou 325035, China.
High-precision, low-power MEMS accelerometers are extensively utilized across civilian applications. Closed-loop accelerometers employing switched-capacitor (SC) circuit topologies offer notable advantages, including low power consumption, high signal-to-noise ratio (SNR), and excellent linearity. Addressing the critical demand for high-precision, low-power MEMS accelerometers in modern geophones, this work focuses on the design and implementation of closed-loop interface ASICs (Application-Specific Integrated Circuits).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!