The growing demand for high-speed data transfer and ultralow latency in wireless networks-on-chips (WiNoC) has spurred exploration into innovative communication paradigms. Recent advancements highlight the potential of the terahertz (THz) band, a largely untapped frequency range, for enabling ultrafast tera-bit-per-second links in chip multiprocessors. However, the ultrashort duration of THz pulses, often in the femtosecond range, makes synchronization a critical challenge, as even minor timing errors can cause significant data loss. This study introduces a preamble-aided noncoherent synchronization scheme for time-of-arrival (ToA) estimation in pulse-based WiNoC communication operating in the THz band (0.02-0.8 THz). The scheme transmits the preamble, a known sequence of THz pulses, at the beginning of each symbol, allowing the energy-detection receiver to collect and analyze the energy of the preamble across multiple integrators. The integrator with maximum energy output is then used to estimate the symbol's ToA. A preamble design based on maximum pulse energy constraints is also presented. Performance evaluations demonstrate a synchronization probability exceeding 0.98 for distances under 10 mm at a signal-to-noise ratio of 20 dB, with a normalized mean squared error below 10-2. This scheme enhances synchronization reliability, supporting energy-efficient, high-performance WiNoCs for future multicore systems.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.3390/mi16010070 | DOI Listing |
Micromachines (Basel)
January 2025
Department of Electronic Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.
The growing demand for high-speed data transfer and ultralow latency in wireless networks-on-chips (WiNoC) has spurred exploration into innovative communication paradigms. Recent advancements highlight the potential of the terahertz (THz) band, a largely untapped frequency range, for enabling ultrafast tera-bit-per-second links in chip multiprocessors. However, the ultrashort duration of THz pulses, often in the femtosecond range, makes synchronization a critical challenge, as even minor timing errors can cause significant data loss.
View Article and Find Full Text PDFDriven by the ever-increasing capacity demands, digital signal processing (DSP) has been first applied to improve the performance of a 50G passive optical network (PON). The main challenge is implementing the burst-mode DSP to deal with the upstream burst signal. This paper proposes a burst-mode DSP using preambles designed for the 50G PON based on entropy-loading discrete multi-tone (DMT).
View Article and Find Full Text PDFSensors (Basel)
June 2024
School of Computing, Engineering and Physical Sciences, University of the West of Scotland, Paisley PA1 2BE, UK.
This study presents a novel computational radio frequency identification (RFID) system designed specifically for assisting blind individuals, utilising software-defined radio (SDR) with coherent detection. The system employs battery-less ultra-high-frequency (UHF) tag arrays in Gen2 RFID systems, enhancing the transmission of sensed information beyond standard identification bits. Our method uses an SDR reader to efficiently manage multiple tags with Gen2 preambles implemented on a single transceiver card.
View Article and Find Full Text PDFMicromachines (Basel)
March 2024
Department of Mechanical Engineering (SCPD), Stanford University, Stanford, CA 94305, USA.
Within the past decade, the aerospace engineering industry has evolved beyond the constraints of using single, large, custom satellites. Due to the increased reliability and robustness of commercial, off-the-shelf printed circuit board components, missions have instead transitioned towards deploying swarms of smaller satellites. Such an approach significantly decreases the mission cost by reducing custom engineering and deployment expenses.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!