To investigate the effect of the sizes of osteon-like concentric microgroove structures on the osteoclastic differentiation of macrophages on titanium surfaces, and to provide reference for the surface modification of implants. The silicon wafers sputtered with titanium were selected as the control group (smooth surface specimens) and four concentric groups (concentric circles with the maximum diameter of 200 μ m, the minimum diameter of 20 μ m, the spacing of concentric circles of 10 or 30 μm, the width of microgrooves of 10 or 30 μm, and the depth of microgrooves of 5 or 10 μm) specimens (the total sample size in each group was 27). The width of microgrooves of C10-5 and C10-10 groups was 10 μm, the depth was 5 and 10 μm, and the width of microgrooves of C30-5 and C30-10 groups was 30 μ m, the depth was 5 and 10 μ m, respectively. The physicochemical properties of the material surfaces were characterized using scanning electron microscopy and contact-angle measurement. The proliferation, adhesion of macrophage-like cell line RAW264.7 and the formation of osteoclast actin-rings on the specimen surfaces were observed by cell counting kit-8 (CCK-8), immunofluorescence staining and laser confocal microscopy. Tartrate resistant acid phosphatase (TRAP) quantitative detection, real-time fluorescence quantitative PCR (RT-qPCR) and Western blotting were used to investigate the regulation of osteon-like concentric microgroove structures on the specimen surfaces on the osteoclastic differentiation of macrophages. Macrophages aggregated and grew disorderly on the surface of the smooth group, and arranged in concentric circles along the microgroove structures on the surfaces of the concentric groups. After 5 days of culture, the cell proliferation of C30 groups (the values of C30-5 group and C30-10 group were 1.335±0.018 and 1.340±0.033, respectively) was significantly higher than that of C10 groups (the values of C10-5 group and C10-10 group were 0.967±0.015 and 1.182±0.020, respectively). The cell proliferation of the four concentric groups was significantly higher than that of the control group (the value was 0.796±0.012), with statistical significance (<0.05). The osteoclasts induced in the C10-5 and C10-10 groups exhibited smaller actin rings and fewer numbers. The TRAP activity in each concentric group was significantly lower than that in the control group (<0.05). The expression levels of osteoclast differentiation-related genes TRAP (0.610±0.022) and CtsK (0.445±0.037) in the C10-10 group were lower compared to the smooth group and other concentric groups, with statistical significance (<0.05), the expression levels of osteoclast differentiation-related proteins TRAP (0.648±0.041), matrix metalloproteinase 9 (MMP-9) (0.688±0.026), and CtsK (0.491±0.016) in the C10-10 group were also lower compared to the smooth group and other concentric groups, with statistical significance (<0.05). The osteon-like concentric microgroove structures inhibit the osteoclastic differentiation of macrophage-like cell line RAW264.7, with the microgrooves 10 μm wide and 10 μm deep showing the most significant inhibitory effect on the osteoclastic differentiation.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.3760/cma.j.cn112144-20240804-00305 | DOI Listing |
Sci Rep
January 2025
Department of Mechanics, School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan, 430068, People's Republic of China.
Droplets impinging on sparse microgrooved polydimethylsiloxane (PDMS) surfaces with different solid fractions was experimentally investigated. First, wettability and stability of droplets on these surfaces was analyzed. The advancing and receding contact angles were found to have a large difference between in the longitudinal direction and in the transverse one, which could be attributed to the anisotropy of the micropatterned surfaces.
View Article and Find Full Text PDFZhonghua Kou Qiang Yi Xue Za Zhi
January 2025
Department of Stomatology, Affiliated Hospital of Putian University, Putian 351106, China.
To investigate the effect of the sizes of osteon-like concentric microgroove structures on the osteoclastic differentiation of macrophages on titanium surfaces, and to provide reference for the surface modification of implants. The silicon wafers sputtered with titanium were selected as the control group (smooth surface specimens) and four concentric groups (concentric circles with the maximum diameter of 200 μ m, the minimum diameter of 20 μ m, the spacing of concentric circles of 10 or 30 μm, the width of microgrooves of 10 or 30 μm, and the depth of microgrooves of 5 or 10 μm) specimens (the total sample size in each group was 27). The width of microgrooves of C10-5 and C10-10 groups was 10 μm, the depth was 5 and 10 μm, and the width of microgrooves of C30-5 and C30-10 groups was 30 μ m, the depth was 5 and 10 μ m, respectively.
View Article and Find Full Text PDFBioact Mater
March 2025
Academy of Medical Engineering and Translational Medicine, Tianjin University, 300072, China.
The preclinical evaluation of drug-induced cardiotoxicity is critical for developing novel drug, helping to avoid drug wastage and post-marketing withdrawal. Although human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) and the engineered heart organoid have been used for drug screening and mimicking disease models, they are always limited by the immaturity and lack of functionality of the cardiomyocytes. In this study, we constructed a Cardiomyocytes-on-a-Chip (CoC) that combines micro-grooves (MGs) and circulating mechanical stimulation to recapitulate the well-organized structure and stable beating of myocardial tissue.
View Article and Find Full Text PDFLangmuir
January 2025
School of Computer and Artifitial Intelligence, Beijing Technology and Business University, Beijing 100048, China.
Inspired by the ultrafast directional water transport structure of Sarracenia trichomes, hierarchical textured surfaces with specific microgrooves were prepared based on laser processing combined with dip modification, in response to the growing problem of freshwater scarcity. The prepared surfaces were tested for droplet transport behavior to investigate the relationship between the surface structure and the driving force of directional water transport and their effects on the water transport distance and water transport velocity. The results showed that surfaces with a superhydrophobic background associated channels of multirib structures, and a dual-gradient surface of gradient hydrophobic background associated channels with gradient structure performed the best in terms of water transport efficiency.
View Article and Find Full Text PDFPLoS One
December 2024
School of Mechanical Engineering, Guizhou University, Guiyang, China.
H13 die steel has the characteristics of high hardness, strong toughness, and good heat resistance, and is a typical difficult to process materials material. During the cutting process, it is prone to accelerate tool wear and cause thermal deformation. By reasonably designing micro-grooves, the comprehensive performance of the tool can be effectively improved.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!