Within the context of the circular economy, the transformation of agri-food waste or by-products into valuable products is essential to promoting a transition towards more sustainable and efficient utilisation of resources. Whey is a very abundant by-product of dairy manufacturing. Apart from partial reutilisation in animal feed or some food supplements, the sustainable management and disposal of whey still represent significant environmental challenges. In this work, whey is considered a valuable resource for producing high-value products, specifically 2,3-butanediol (2,3-BDO), which was produced through fermentation using the bacterial strain 43103. The described process yielded a >90% purity of 2,3-BDO, which was evaluated as a potential chain extender in the synthesis of bio-based waterborne polyurethane dispersions (PUDs). The incorporation of whey-derived 2,3-BDO led to the development of PUDs with up to 90% bio-based content without detrimental effects on the process or liquid-phase properties. The combination of 100% bio-based polyether polyols with partially renewable L-lysine ethyl ester diisocyanate and whey-derived 2,3-BDO as a chain extender generated totally stable, low-particle-size water dispersions of amorphous polymers characterised by similar structure and molecular weight compared to those of alternative petroleum-based PUDs. These results open up the possibility of incorporating fermentation-derived 2,3-BDO as a totally renewable component in bio-based PUDs as potential sustainable resinous systems for further formulation of water-based coatings or adhesives.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11743733 | PMC |
http://dx.doi.org/10.3389/fchem.2024.1516427 | DOI Listing |
Front Chem
January 2025
GAIKER Technology Centre, Basque Research and Technology Alliance (BRTA), Parque Tecnológico de Bizkaia, Zamudio, Spain.
Within the context of the circular economy, the transformation of agri-food waste or by-products into valuable products is essential to promoting a transition towards more sustainable and efficient utilisation of resources. Whey is a very abundant by-product of dairy manufacturing. Apart from partial reutilisation in animal feed or some food supplements, the sustainable management and disposal of whey still represent significant environmental challenges.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
College of Textiles Science and Engineering, Wuhan Textile University, Wuhan 430200, China; State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China. Electronic address:
Faced with all kinds of serious ecological and environmental protection problems in today's society, development must take the sustainable and green road. Nanocellulose aerogels with the advantages of wide resource of raw materials, low cost, good biocompatibility and biodegradation, are good thermal and sound insulation materials. Herein, a versatile composite aerogel with good thermal stability and heat-insulating property was prepared by freeze-drying method using cellulose nanocrystals (CNCs), waterborne polyurethane (WPU) and sepiolite (SEP) as substrates.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
School of Basic Education, Beijing Polytechnic College, Beijing 100042, China.
In this study, waterborne polyurethane (WPU), a novel modifier, was used for the wet surface modification of talc, and its mechanism was investigated. Polypropylene (PP)-based composites with modified talc were synthesized and subjected to an examination of their mechanical properties. The wetting contact angle demonstrated that the modified talc exhibited an excellent modification effect at a specific amount of modifier (2.
View Article and Find Full Text PDFMolecules
December 2024
Key Laboratory of Advanced Materials of Ministry of Education of China, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
Waterborne polyurethane, with a mechanical strength comparable to solvent-based types, is eco-friendly and safe, using water as a dispersion medium. Polyacrylate excels in film formation and weather resistance but suffers from "hot stickiness and cold brittleness". Merging polyurethane and polyacrylate creates advanced hybrids, while organosilicon enhances properties but is restricted due to hydrolytic crosslinking.
View Article and Find Full Text PDFNatl Sci Rev
January 2025
Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China.
The high thermopower of ionic thermoelectric (-TE) materials holds promise for miniaturized waste-heat recovery devices and thermal sensors. However, progress is hampered by laborious trial-and-error experimentations, which lack theoretical underpinning. Herein, by introducing the simplified molecular-input line-entry system, we have addressed the challenge posed by the inconsistency of -TE material types, and present a machine learning model that evaluates the Seebeck coefficient with an of 0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!