In this work, we present a facile and straightforward approach for fabricating highly stretchable photodetectors based on AgS and TiCT MXene hybrid materials. These devices exhibit exceptional mechanical resilience, maintaining stable electrical and optical performance even after 10 000 cycles of 30% strain. The incorporation of MXene not only enhances the device's electrical durability but also ensures the retention of conductivity under significant mechanical deformation, positioning MXene as a critical material for the advancement of flexible electronics. These devices demonstrate strong photoresponses across a broad wavelength range, from visible to infrared, confirming their potential for use in flexible and stretchable optoelectronic applications. This study highlights the advantage of utilizing MXene in stretchable electronics and offers a promising route for developing durable, flexible devices for next-generation wearable technologies.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.4c19190 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
NIR-Reflective Black Photonic Films Designed for Effective LiDAR Recognition.
ACS Appl Mater Interfaces
January 2025
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea.
Conventional dark-tone paints absorb both visible light and near-infrared (NIR) wavelengths, posing a challenge for light detection and ranging (LiDAR) recognition in autonomous driving. To overcome this issue, various chemical and structural coating materials have been explored to selectively reflect NIR. In this study, we newly propose colloidal photonic crystals with a stopband in the NIR range, fabricated through the spontaneous formation of crystalline arrays of silica particles dispersed in a photocurable resin, as a potential solution.
View Article and Find Full Text PDFStretchable AgS-MXene Photodetector Designed for Enhanced Electrical Durability and High Sensitivity.
ACS Appl Mater Interfaces
January 2025
Advanced Materials Division, Korea Research Institute of Chemical Technology, Daejeon 34114, Korea.
In this work, we present a facile and straightforward approach for fabricating highly stretchable photodetectors based on AgS and TiCT MXene hybrid materials. These devices exhibit exceptional mechanical resilience, maintaining stable electrical and optical performance even after 10 000 cycles of 30% strain. The incorporation of MXene not only enhances the device's electrical durability but also ensures the retention of conductivity under significant mechanical deformation, positioning MXene as a critical material for the advancement of flexible electronics.
View Article and Find Full Text PDFA low-cost soft sensor for sewer flow monitoring - Learning from water level measurements in manholes.
Water Res
January 2025
School of Energy and Environment, City University of Hong Kong, Hong Kong SAR, China; State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong SAR, China. Electronic address:
Flow meters are commonly used in manholes to monitor the flow rate for sewer operation and management. However, the large-scale deployment of flow meters in a sewer system is cost-prohibitive due to their high costs and the need for frequent maintenance. This paper proposes a soft sensor that estimates flow rates based on water level measurements in a manhole.
View Article and Find Full Text PDFAcrobatics at the insect scale: A durable, precise, and agile micro-aerial robot.
Sci Robot
January 2025
Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA.
Aerial insects are exceptionally agile and precise owing to their small size and fast neuromotor control. They perform impressive acrobatic maneuvers when evading predators, recovering from wind gust, or landing on moving objects. Flapping-wing propulsion is advantageous for flight agility because it can generate large changes in instantaneous forces and torques.
View Article and Find Full Text PDFRoll-to-Roll Flash Joule Heating to Stabilize Electrocatalysts onto Meter-Scale Ni Foam for Advanced Water Splitting.
ACS Nano
January 2025
State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.
The seamless integration of electrocatalysts onto the electrode is crucial for enhancing water electrolyzers, yet it is especially challenging when scaled up to large manufacturing. Despite thorough investigation, there are few reports that tackle this integration through roll-to-roll (R2R) methodology, a technique crucial for fulfilling industrial-scale demands. Here, we develop an R2R flash Joule heating (R2R-FJH) system to process catalytic electrodes with superior performance.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!