Wearable sensors with multiple functions are attracting significant attention due to their broad applications in health monitoring and human-computer interaction. Despite significant progress in wearable sensors, it is a significant challenge to monitor temperature and stress simultaneously with a single sensor. A wearable multifunctional optical sensor based on Er/Yb co-doped GdO nanoparticles and a tapered U-shaped fiber is proposed to monitor both temperature and stress in this paper. Temperature resolution of about 0.16℃ is achieved by monitoring the fluorescence intensity ratio (FIR) around 562 nm and 522 nm emitted by Er/Yb co-doped GdO phosphors, which are integrated in a single-mode fiber (SMF). The stress measurement is obtained by monitoring the fluorescence intensity change around 522 nm, which is insensitive to temperature. The results show that the pressure sensitivity and low detection limit are 7% kPa and 127 Pa, respectively. In addition, the response time of 20 ms are achieved for stress sensing. As a proof-of-concept, human skin temperature and heart and respiratory rates are detected before and after exercise by positioning the sensing probe on the wrist. Furthermore, heart and respiratory rates in different parts of the body are also monitored, which are in good agreement with one another. The results demonstrate that the proposed wearable multifunctional optical sensor has huge potential for health monitoring.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OL.544678 | DOI Listing |
Wearable sensors with multiple functions are attracting significant attention due to their broad applications in health monitoring and human-computer interaction. Despite significant progress in wearable sensors, it is a significant challenge to monitor temperature and stress simultaneously with a single sensor. A wearable multifunctional optical sensor based on Er/Yb co-doped GdO nanoparticles and a tapered U-shaped fiber is proposed to monitor both temperature and stress in this paper.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
School of Materials and Energy, Lanzhou University (LZU), Lanzhou 730000, China.
Complementary neural network circuits combining multifunctional high-performance p-type with n-type organic artificial synapses satisfy sophisticated applications such as image cognition and prosthesis control. However, implementing the dual-modal memory features that are both volatile and nonvolatile in a synaptic transistor is challenging. Herein, for the first time, we propose a single vertical n-type organic synaptic transistor (VNOST) with a novel polymeric organic mixed ionic-electronic conductor as the core channel material to achieve dual-modal synaptic learning/memory behaviors at different operating current densities via the formation of an electric double layer and the reversible ion doping.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
School of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China. Electronic address:
Conductive hydrogels with exceptional mechanical properties have received extensive attention in flexible strain sensors. However, there is still a huge challenge in the preparation of hydrogels with high toughness, conductivity and frost resistance performance. In this study, the prepared PA-PAAM-CS (PPAC) composite hydrogels were obtained by incorporating phytic acid (PA) and chitosan (CS) into poly(acrylamide-co-stearyl methacrylate) (PAAM) polymer network.
View Article and Find Full Text PDFACS Nano
January 2025
College of Energy, Soochow Institute for Energy and Materials Innovations, Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Soochow University, Suzhou 215006, P. R. China.
Potassium metal batteries (KMBs) hold promise for stationary energy storage with certain cost and resource merits. Nevertheless, their practicability is greatly handicapped by dendrite-related anodes, and the target design of specialized separators to boost anode safety is in its nascent stage. Here, we develop a thermally robust biopolymeric separator customized via a solvent-exchange and amino-siloxane decoration strategy to render durable and safe KMBs.
View Article and Find Full Text PDFNanomicro Lett
January 2025
Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing, 100191, People's Republic of China.
The proliferation of wearable biodevices has boosted the development of soft, innovative, and multifunctional materials for human health monitoring. The integration of wearable sensors with intelligent systems is an overwhelming tendency, providing powerful tools for remote health monitoring and personal health management. Among many candidates, two-dimensional (2D) materials stand out due to several exotic mechanical, electrical, optical, and chemical properties that can be efficiently integrated into atomic-thin films.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!