For quantum-dot light-emitting diodes (QLED), electrical aging commonly introduces collective aging sources across all layers, making it difficult to isolate the impact of each layer on electroluminescence (EL) degradation. In this work, a layer-selective aging method using active photoexcitation is proposed, in which the photoexcitation wavelength is used to selectively target specific layers for exciton generation, and an electrical bias is applied to induce photocurrent and create charges. An iterative aging-sampling (A-S) procedure is used to link aging conditions to EL degradation. It is found that photo-aging leads to strong but reversible quenching of EL intensity, which is interpreted as being caused by electrical field screening due to trapped charges in the quantum dot (QD) layer and requires electrical activation before the sampling (S) step. Repeated A-S cycles in a model red QLED system show that excitations in the QD layer result in negligible EL degradation. In contrast, aging of the hole-transport (HT) layer enables an acceleration of aging rate by 3 orders of magnitude compared to standard aging and is interpreted as a result of photo-charge accumulation in the HT layer, particularly related to electrons and low electron mobility.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.202412292 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Active Locating Exciton- and Charge-Initialized Degradation in Quantum-Dot Light-Emitting Diodes.
Small
January 2025
Central Research Institute, BOE Technology Group Co. Ltd, Beijing, 100176, China.
For quantum-dot light-emitting diodes (QLED), electrical aging commonly introduces collective aging sources across all layers, making it difficult to isolate the impact of each layer on electroluminescence (EL) degradation. In this work, a layer-selective aging method using active photoexcitation is proposed, in which the photoexcitation wavelength is used to selectively target specific layers for exciton generation, and an electrical bias is applied to induce photocurrent and create charges. An iterative aging-sampling (A-S) procedure is used to link aging conditions to EL degradation.
View Article and Find Full Text PDFInterfacial mechanisms of enhanced photoluminescence in AgI-doped red light emitting perovskite quantum dot glass.
J Colloid Interface Sci
January 2025
Institute of Optoelectronic Materials and Devices, College of Optical and Electronic Technology, China Jiliang University, Hangzhou 310018 PR China. Electronic address:
Red light emitting perovskite quantum dot (PQD) glass, with narrow-band emission and excellent stability, holds great potential for applications in liquid crystal displays. However, its low photoluminescence quantum yield (PLQY) remains the biggest obstacle limiting its practical application. Additionally, the mechanism behind the enhancement of the PLQY is not well understood, which restricts the further improvement of the PLQY in red light emitting PQD glass.
View Article and Find Full Text PDFSynthesis and Characterization of Copolymers with Fluorene-di-2-thienyl-2,1,3-benzothiadiazole Units for Application in Optoelectronic Devices.
Polymers (Basel)
December 2024
Military Institute of Engineering-IME, Department of Materials Science, Praça General Tibúrcio, 80, Urca, Rio de Janeiro 22290-270, RJ, Brazil.
Conjugated donor-acceptor (D-A) copolymers are widely used in optoelectronic devices due to their influence on the resulting properties. This study focuses on the synthesis and characterization of the conjugated D-A copolymer constructed with fluorene and di-2-thienyl-2,1,3-benzothiadiazole units, resulting in Poly[2,7-(9,9-dioctyl-fluorene)-alt-5,5-(4,7-di(2-thienyl)-2,1,3-benzothiadiazole)] (PFDTBT). The synthesis associated with reaction times of 48 and 24 h, the latter incorporating the phase-transfer catalyst Aliquat 336, was investigated.
View Article and Find Full Text PDFHighly Efficient Blue Light-Emitting Diodes Enabled by Gradient Core/Shell-Structured Perovskite Quantum Dots.
ACS Nano
January 2025
MIIT Key Laboratory of Advanced Display Materials and Devices, Jiangsu Province Engineering Research Center of Quantum Dot Display, School of Materials Science and Engineering, Institute of Optoelectronics & Nanomaterials, Nanjing University of Science and Technology, Nanjing, Jiangsu 210094, China.
Room temperature (RT) synthesized mixed bromine and chlorine CsPbBrCl perovskite quantum dots (Pe-QDs) offer notable advantages for blue quantum dot light-emitting diodes (QLEDs), such as cost-effective processing and narrow luminescence peaks. However, the efficiency of blue QLEDs using these RT-synthesized QDs has been limited by inferior crystallinity and deep defect presence. In this study, we demonstrate a precise approach to constructing high-quality gradient core-shell (CS) structures of CsPbBrCl QD through anion exchange.
View Article and Find Full Text PDFSelf-Assembled Monolayer-Functionalized NiO Hole Injection layer for Improved Charge Injection in Quantum Dot Light-Emitting Diodes.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Kyungpook National University, Daegu 41566, Republic of Korea.
The development of quantum dot light-emitting diodes (QLEDs) represents a promising advancement in next-generation display technology. However, there are challenges, especially in achieving efficient hole injection, maintaining charge balance, and replacing low-stability organic materials such as PEDOT:PSS. To address these issues, in this study, self-assembled monolayers (SAMs) were employed to modify the surface properties of NiO, a hole injection material, within the structure of ITO/HIL/TFB/QDs/ZnMgO/Al QLEDs.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!