A bimetallic organic framework (CuNi-MOF) was synthesized as a corrosion inhibitor using the solvothermal method. The effectiveness of the inhibitor in corrosion prevention of AISI 304 and 316 in 1N hydrochloric acid solution at room temperature was evaluated using weight loss measurements, electrochemical methods, and surface characterization techniques. The formation of CuNi-MOF protective layer on the stainless-steel surface was confirmed through Field Emission Scanning Electron Microscopes (FESEM), Energy Dispersive Spectroscopy (EDS), and X-Ray Diffraction (XRD) analysis. The result showed that the synthesized inhibitor with a concentration of 150 mg/L could improve the corrosion inhibition of studied materials by up to 87.12 % for AISI 304 and 91.9 % for AISI 316, respectively. The potentiodynamic polarization data indicated the studied inhibitor acts as an anodic type inhibitor and EIS investigations revealed a significant increase in polarization resistance with addition of 150 mg/L CuNi-MOF. The study of adsorption energy (ΔG ) revealed the Langmuir adsorption isotherm prevails in CuNi-MOF adsorption, encompassing both chemisorption and physisorption mechanisms.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11731262 | PMC |
| http://dx.doi.org/10.1016/j.heliyon.2024.e41296 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Synthesis and evaluation of CuNi-MOF as a corrosion inhibitor of AISI 304 and 316 stainless steel in 1N HCl solution.
Heliyon
January 2025
Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84156-83111, Iran.
A bimetallic organic framework (CuNi-MOF) was synthesized as a corrosion inhibitor using the solvothermal method. The effectiveness of the inhibitor in corrosion prevention of AISI 304 and 316 in 1N hydrochloric acid solution at room temperature was evaluated using weight loss measurements, electrochemical methods, and surface characterization techniques. The formation of CuNi-MOF protective layer on the stainless-steel surface was confirmed through Field Emission Scanning Electron Microscopes (FESEM), Energy Dispersive Spectroscopy (EDS), and X-Ray Diffraction (XRD) analysis.
View Article and Find Full Text PDFAdvanced Solid Lubrication with COK-47: Mechanistic Insights on the Role of Water and Performance Evaluation.
Adv Sci (Weinh)
January 2025
Institute for Engineering Design and Product Development, Research Unit Tribology E307-05, TU Wien, Vienna, 1060, Austria.
Metal-organic framework (MOF) nanoparticles have attracted widespread attention as lubrication additives due to their tunable structures and surface effects. However, their solid lubrication properties have been rarely explored. This work introduces the positive role of moisture in solid lubrication in the case of a newly described Ti-based MOF (COK-47) powder.
View Article and Find Full Text PDFPredicting the Effect of RSW Parameters on the Shear Force and Nugget Diameter of Similar and Dissimilar Joints Using Machine Learning Algorithms and Multilayer Perceptron.
Materials (Basel)
December 2024
Department of Manufacturing Processes and Production Engineering, Rzeszow University of Technology, Al. Powst. Warszawy 8, 35-959 Rzeszow, Poland.
Resistance spot-welded joints are crucial parts in contemporary manufacturing technology due to their ubiquitous use in the automobile industry. The necessity of improving manufacturing efficiency and quality at an affordable cost requires deep knowledge of the resistance spot welding (RSW) process and the development of artificial neural network (ANN)- and machine learning (ML)-based modelling techniques, apt for providing essential tools for design, planning, and incorporation in the welding process. Tensile shear force and nugget diameter are the most crucial outputs for evaluating the quality of a resistance spot-welded specimen.
View Article and Find Full Text PDFReconstruction of the Passive Layer of AISI 304 and 316 Steel After Scratching.
Materials (Basel)
December 2024
Institute of Environmental Engineering, Wrocław University of Environmental and Life Sciences, pl. Grunwaldzki 24, 50-363 Wroclaw, Poland.
Austenitic stainless steels are used widely in many fields due to their good mechanical properties and high resistance to corrosion. This work focuses on the reconstruction of the passive film after scratching. The purpose of the study was to compare changes in the rate of passive layer reconstruction and to discuss the effect of both the type of material and its electrochemical treatment on the reconstruction of the passive layer for two types of stainless steel: 304 and 316.
View Article and Find Full Text PDFApplication of machine learning and neural network models based on experimental evaluation of dissimilar resistance spot-welded joints between grade 2 titanium alloy and AISI 304 stainless steel.
Heliyon
December 2024
Department of Manufacturing Processes and Production Engineering, Rzeszow University of Technology, al. Powst. Warszawy 8, 35-959, Rzeszów, Poland.
The use of a composite welded joint consisting of titanium and austenitic stainless steel metals is evidently a favourable selection for industrial applications employing the resistance spot welding (RSW) operation. Nevertheless, achieving a high-quality welded joint proved challenging owing to the properties of the diverse range of materials' used. To improve the quality of dissimilar welded joints, the welding parameters should be selected precisely.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!