A novel fabrication of graphitic carbon nitride/chitosan composite modified with thiosemicarbazide for the effective static and dynamic adsorption of Pb from aqueous media.

In this work, graphitic carbon nitride (g-CN) prepared by thermal treatment, graphitic carbon nitride/chitosan (GCS), and graphitic carbon nitride/chitosan embedded thiosemicarbazide (TGCS) were developed as an effective solid adsorbent. The fabricated adsorbents were characterized by nitrogen adsorption, ATR-FTIR, TGA, XRD, ζ potential, SEM, and TEM, where TGCS composite had a higher surface area (536.79 m/g), total pore volume (0.4152 cm /g), average pore size (3.09 nm), and pH (6.4). TGCS revealed a Langmuir adsorption capacity of 329.61 mg/g for Pb at an adsorbent dosage of 1.5 g/L, pH 5, 45 min of shaking, and 23 °C. The experimental results were applied well by pseudo-second-order kinetic and Langmuir isotherm. Through the first five adsorption-desorption cycles, only 12.2, 6.2, and 5.1 % decline in efficiency were noted for g-CN, GCS, and TGCS, respectively. Column adsorption capacity (q, mg/g) was determined to be 132.24 mg/g at bed height 3 cm, flow rate of 80 mL/min, and 80 mg/L as initial Pb concentration. Based on the lower reduced chi-square values (ꭓ × 10, 3.8810-12.9000) and the higher correlation coefficients (R, 0.9917-0.9979), the Yoon-Nelson and Thomas models suggested an acceptable match for the breakthrough curve. Our findings suggested that TGCS had great adsorption capacity, strong selectivity, and quick kinetics, indicating its potential for water treatment applications.