Passive temperature controls like passive daytime radiative cooling (PDRC)-heating (PDRH), and thermal insulation are essential to meet the growing demand for energy-efficient thermal solutions. When combined with advanced functions like electromagnetic interference shielding, these technologies can significantly enhance scalability. However, existing approaches using single thin films or uniform porous materials face inherent limitations in optimizing versatile functions, while lightweight, insulating aerogels can extend their multifunctionality by manipulating pores and fillers. Herein, carbon black (CB)-containing cellulose acetate (CA)aerogels (CB/CA aerogel) featuring gradient pores and bilayer structures are devised to implement switchable PDRC-PDRH and broadband spectral emissivity from infrared to microwave, along with high thermal insulation and elasticity. Using stirring and freeze-drying methods, the CA aerogels show low thermal conductivity (≈0.034 W mK) and demonstrate broad-spectrum functionality, with over 95.7% solar reflectivity and 93% long-wavelength infrared (LWIR) emittance, achieving a 12.25 °C temperature reduction in outdoor conditions. Furthermore, the CB/CA aerogels enhance LWIR emittance to 98.7% and provide broadband spectral emissivity with 39.4% microwave absorption. This study offers a viable solution to simultaneously control radiative cooling and microwave absorption across a broad spectrum in porous media.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.202409873 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced ensemble learning-based uncertainty and sensitivity analysis of ventilation rate in a novel radiative cooling building.
Heliyon
January 2025
Department of Energy System Engineering, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, No. 15, Pardis St., Molasadra Ave., Vanak Sq., Tehran, Iran.
The rising global demand for air conditioning systems, driven by increasing temperatures and urbanization, has led to higher energy consumption and greenhouse gas emissions. HVAC systems, particularly AC, account for nearly half of building energy use, highlighting the need for efficient cooling solutions. Passive cooling, especially radiative cooling, offers potential to reduce cooling loads and improve energy efficiency.
View Article and Find Full Text PDFTemplate-Thermally Induced Phase Separation-Assisted Microporous Regulation in Poly(lactic acid) Aerogel for Sustainable Radiative Cooling.
Biomacromolecules
January 2025
National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China.
Herein, an eco-friendly and degradable poly(lactic acid) aerogel was prepared by combining a poly(ethylene glycol) template material with thermally induced phase separation. Due to the tailored pore size introduced by the template material, the aerogel exhibits high solar reflectance (92.0%), excellent thermal emittance (90.
View Article and Find Full Text PDFAuto-Deposited Microparticle Composite Coating for Low-Cost and Efficient Daytime Radiative Cooling.
ACS Appl Mater Interfaces
January 2025
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
Radiative cooling is an excellent strategy for mitigating global warming, by enhancing heat fluxes away from the Earth, thus balancing the Earth's heat flow. However, for randomly particle-dispersed radiative cooling materials, the particle content as high as 94-96 wt % or 60 vol %, far exceeds the critical pigment percentage (40-50%) of traditional coatings, preventing its large-scale application. Here, inspired by particle deposition under gravity in solution, we demonstrate an auto-deposited SiO composite radiative cooling coating (ADRC) which reduces the amounts of particles required and lowers costs.
View Article and Find Full Text PDFLow-vibration cryogenic test facility for next generation of ground-based gravitational-wave observatories.
Rev Sci Instrum
January 2025
OzGrav-ANU, ARC Centre for Gravitational Astrophysics, College of Science, The Australian National University, Canberra ACT2601, Australia.
We present the design and commissioning of a cryogenic low-vibration test facility that measures displacement noise from a gram-scale silicon cantilever at the level of 10-16m/Hz at 1 kHz. This sensitivity is necessary for future tests of thermal noise models on cross sections of silicon suspension samples proposed for future gravitational-wave detectors. A volume of ∼36 l is enclosed by radiation shields cooling an optical test cavity that is suspended from a multi-stage pendulum chain providing isolation from acoustic and environmental noise.
View Article and Find Full Text PDFScalable, Flexible, and UV-Resistant Bacterial Cellulose Composite Film for Daytime Radiative Cooling.
ACS Appl Mater Interfaces
January 2025
School of Chemistry and Materials Science, Jiangsu Key Laboratory of New Energy Devices & Interface Science, Nanjing University of Information Science & Technology, Ning-Liu Road 219, Nanjing 210026, China.
Radiative cooling, a passive cooling technology, functions by reflecting the majority of solar radiation (within the solar spectrum of 0.3-2.5 μm) and emitting thermal radiation (within the atmospheric windows of 8-13 μm and 16-20 μm).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!