Mechanisms Behind Graphitization Modification in Polycrystalline Diamond by Nanosecond Pulsed Laser.

The ultraprecision machining of diamond presents certain difficulties due to its extreme hardness. However, the graphitization modification can enhance its machinability. This work presents an investigation into the characteristics of the graphitization modification in polycrystalline diamond induced by a nanosecond pulsed laser. In this paper, the morphology of microgrooves under laser modification was observed, material deposition and graphitization in different regions were researched, and the regularities of microgrooves at different laser powers were obtained. A molecular dynamics (MD) simulation was carried out to reveal the mechanism behind graphitization modification; when the pulse laser acts on the diamond surface and the temperature rises to the critical temperature of graphitization, the graphite crystal nuclei form and grow, resulting in the graphitization modification. It was confirmed that the existence of grain boundaries (GBs) contributed to the graphitization of polycrystalline diamond during laser modification. It was predicted that a lower laser power could cause a higher proportion of graphitization. The results of ablation thresholds and the effect of the defocusing position on the graphitization of diamond showed that for a fixed laser power, the highest graphitization ratio could be obtained when the defocusing quantity was optimized. Finally, the results of precision grinding experiments verified the feasibility of using laser graphitization pretreatment to improve the efficiency and quality of precision grinding.