LiMnO, a significant cathode material for lithium-ion batteries, has garnered considerable attention due to its low cost and environmental friendliness. However, its widespread application is constrained by its rapid capacity degradation and short cycle life at elevated temperatures. To enhance the electrochemical performance of LiMnO, we employed a liquid-phase co-precipitation and calcination method to incorporate Cr into the LiMnO cathode material, successfully synthesizing a series of LiCrMnO (x = 0~0.06). The prepared Cr-doped samples exhibited an excellent spinel structure and a unique truncated octahedral morphology. Additionally, the substitution of Mn in LiMnO by Cr, coupled with the significantly higher Cr-O bond energy compared to Mn-O bond energy, enhanced the stability of the crystal structure and inhibited the Jahn-Teller effect. Experimental results demonstrated that the optimized LiCrMnO displayed superior electrochemical performance, with a capacity retention rate of 93.24% after 500 cycles under a 0.5C current density; even at 50 °C, the capacity retention rate remained at 86.46% after 350 cycles under a 0.5C current density. The polyhedral morphology formed by Cr doping in LiMnO offers an effective approach to achieving high-performance LiMnO cathode materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3390/ijms252413270 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Deciphering the Role of Second Metal in M-Ni (M = Fe, Ni, and Mn) Heterobimetallic Electrocatalysts in Controlling the HAT versus Hydride Transfer Mechanism for the Dehydrogenation of Alcohols.
Small
January 2025
Department of Chemistry, IIT Gandhinagar, Palaj, Gujarat, 382355, India.
The second 3d-transition metal incorporation in Ni-(oxy)hydroxide has a drastic effect on alkaline OER and alcohol dehydrogenation reactivity. While Mn incorporation suppresses the alkaline OER, it greatly improves the alcohol dehydrogenation reactivity. A complete reversal of reactivity is obtained when Fe is incorporated, which shows better performance for alkaline OER with poor alcohol dehydrogenation reactivity.
View Article and Find Full Text PDFLi+ Quasi-Grotthuss Topochemistry Transport Enables Direct Regeneration of Spent Lithium-Ion Battery Cathodes.
Angew Chem Int Ed Engl
January 2025
Xi'an Jiaotong University, School of Chemistry, CHINA.
Direct regeneration of spent lithium-ion batteries offers economic benefits and a reduced CO2 footprint. Surface prelithiation, particularly through the molten salt method, is critical in enhancing spent cathode repair during high-temperature annealing. However, the sluggish Li+ transport kinetics, which relies on thermally driven processes in the traditional molten salt methods, limit the prelithiation efficiency and regeneration of spent cathodes.
View Article and Find Full Text PDFMultifunctional Siloxane Additive Enabling Ultrahigh-Nickel Lithium Battery with Long Cycle Life at 30 and 60 °C.
Small
January 2025
School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510640, China.
Ultrahigh-nickel layered oxide cathodes (≥90% nickel) possess exceptionally high discharge capacities, which can significantly improve the energy density of lithium-ion batteries and alleviate the driving range anxiety of electric vehicles. However, the high interfacial reactivity of ultrahigh-nickel cathodes, especially the detrimental side reactions with harmful acidic species like HF in the electrolyte, can deteriorate the battery interface and reduce the cycle life, hindering their practical application. In this study, 3-isocyanatopropyltrimethoxysilane (PTTS-NCO) is introduced as the electrolyte additive, which can effectively scavenge the harmful acidic species in the electrolyte and form a protective surface layer at the electrode/electrolyte interface, thereby enhancing the electrochemical performance of the battery (NCM90/Li).
View Article and Find Full Text PDFSymmetry Breaking of FeN4 Moiety via Edge Defects for Acidic Oxygen Reduction Reaction.
Angew Chem Int Ed Engl
January 2025
University of Science and Technology of China, National Synchrotron Radiation Laboratory, 42#, South Road of HeZuoHua, 230029, Hefei, CHINA.
Fe-N-C catalysts, with a planar D4h symmetric FeN4 structure, show promising as noble metal-free oxygen reduction reaction catalysts. Nonetheless, the highly symmetric structure restricts the effective manipulation of its geometric and electronic structures, impeding further enhancements in oxygen reduction reaction performance. Here, a high proportion of asymmetric edge-carbon was successfully introduced into Fe-N-C catalysts through morphology engineering, enabling the precise modulation of the FeN4 active site.
View Article and Find Full Text PDFIntensifying Interfacial Reverse Hydrogen Spillover for Boosted Electrocatalytic Nitrate Reduction to Ammonia.
Angew Chem Int Ed Engl
January 2025
Shandong university, School of Chemistry and Chemical Engineering, No 27, Shandananlu,, 250100, Jinan, CHINA.
Rational regulation of active hydrogen (*H) behavior is crucial for advancing electrocatalytic nitrate reduction reaction (NO3RR) to ammonia (NH3), yet in-depth understanding of the *H generation, transfer, and utilization remains ambiguous, and explorations for *H dynamic optimization are urgently needed. Herein we engineer a Ni3N nanosheet array intimately decorated with Cu nanoclusters (NF/Ni3N-Cu) for remarkably boosted NO3RR. From comprehensive experimental and theoretical investigations, the Ni3N moieties favors water dissociation to generate *H, and then *H can rapidly transfer to the Cu via unique reverse hydrogen spillover mediating interfacial Ni-N-Cu bridge bond, thus increasing *H coverage on the Cu site for subsequent deoxygenation/hydrogenation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!