Effective modifications for the buried interface between self-assembled monolayers (SAMs) and perovskites are vital for the development of efficient, stable inverted perovskite solar cells (PSCs) and their tandem photovoltaics. Herein, an ionic-liquid-SAM hybrid strategy is developed to synergistically optimize the uniformity of SAMs and the crystallization of perovskites above. Specifically, an ionic liquid of 1-butyl-3-methyl-1H-imidazol-3-iumbis((trifluoromethyl)sulfonyl)amide (BMIMTFSI) is incorporated into the SAM solution, enabling reduced surface roughness, improved wettability, and a more evenly distributed surface potential of the SAM film. Leveraging this optimized substrate, a favorable growth of high-quality perovskite crystals is achieved. Furthermore, the introduced functional ions readily bond with the perovskites, effectively passivating undesirable cation or halide vacancies of the perovskite near the buried interface. Remarkably, high power conversion efficiencies (PCEs) of 25.68% and 22.53% are obtained for normal-bandgap (≈1.55 eV) and wide-bandgap (WBG) (≈1.66 eV) PSCs along with improved operational stability. Additionally, a champion PCE of 19.50% is achieved for semitransparent WBG PSCs, further delivering an impressive PCE of 28.34% for integrated four-terminal tandem photovoltaics when combined with CuInGaSe solar cells.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.202412692 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Dual Interface Modification for Reduced Nonradiative Recombination in n-i-p Methylammonium-Free Perovskite Solar Cells.
ACS Appl Mater Interfaces
January 2025
Institute of Advanced Materials (INAM), Universitat Jaume I, Av. Vicent Sos Baynat, s/n, 12071 Castellón de la Plana, Spain.
High defect concentrations at the interfaces are the basis of charge extraction losses and instability in perovskite solar cells. Surface engineering with organic cations is a common practice to solve this issue. However, the full implications of the counteranions of these cations for device functioning are often neglected.
View Article and Find Full Text PDFSuper Strong Bonding at the interface between ETL and Perovskite for Robust Flexible Optoelectronic Devices.
Angew Chem Int Ed Engl
January 2025
Peking University, College of Chemistry and Molecular Engineering, Chengfu Road No.292, 100871, Beijing, CHINA.
Organic-inorganic hybrid perovskites have demonstrated great potential for flexible optoelectronic devices due to their superior optoelectronic properties and structural flexibility. However, mechanical deformation-induced cracks at the buried interface and delamination from the substrate severely constrain the optoelectronic performance and device lifespan. Here, we design a two-site bonding strategy aiming to reinforce the mechanical stability of the SnO2/perovskite interface and perovskite layer using a multifunctional organic salt, 4-(trifluoromethoxy)phenylhydrazine hydrochloride (TPH).
View Article and Find Full Text PDFEnhancing open-circuit voltage in FAPbI perovskite solar cells self-formation of coherent buried interface FAPbICl.
Chem Commun (Camb)
January 2025
College of Science, Hebei University of Science and Technology, 26 Yuxiang Road, Shijiazhuang 050018, P. R. China.
The interfaces between the perovskite and charge-transporting layers typically exhibit high defect concentrations, which are the primary cause of open-circuit voltage loss. Passivating the interface between the perovskite and electron-transporting layer is particularly challenging due to the dissolution of surface treatment agents during the perovskite coating. In this study, a coherent FAPbICl buried interface was simultaneously formed during the preparation of FAPbI.
View Article and Find Full Text PDFAcidic Engineering on Buried Interface toward Efficient Inorganic CsPbI Perovskite Light-Emitting Diodes.
Nano Lett
January 2025
School of Environmental Science and Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, Shanghai 200240, China.
Inorganic CsPbI perovskite has emerged as a promising emitter for deep-red light-emitting diodes (LEDs) due to its intrinsic thermal stability and suitable bandgap. However, uncontrollable CsPbI crystallization induced by an alkaline zinc oxide (ZnO) substrate in bulk film-based LEDs leads to insufficient external quantum efficiencies (EQEs) at high brightness, leaving obstacles in commercialization progress. Herein, we demonstrate an effective acidic engineering strategy with wide applicability to modify the surface property of ZnO and regulate CsPbI crystallization.
View Article and Find Full Text PDFLiOH Additive Triggering Beneficial Aging Effect of SnO Nanocrystal Colloids for Efficient Wide-Bandgap Perovskite Solar Cells.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Wide-Bandgap Semiconductor Devices and Integrated Technology, Xidian University, Xi'an 710071, PR China.
Commercial SnO nanocrystals used for producing electron transporting layers (ETLs) of perovskite solar cells (PSC) are prone to aggregation at room temperature and contain many structural defects. Herein, we report that the LiOH additive can simultaneously delay the aggregation and donate the beneficial aging effect to SnO nanocrystals. The resulting SnO ETLs show the desired characteristics, including a broadened absorption range, reduced defects, improved transporting properties, and decreased work function.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!