AI Article Synopsis

  • Multi-walled carbon nanotubes (CNT) are embedded with RuPdIrPtAu high entropy alloys (HEA) using pulsed laser irradiation in liquids, resulting in a composite that enhances hydrazine oxidation reactions (HzOR) for improved water electrolysis.
  • HEA particles, sized around 2-5 nm, are effectively dispersed on the CNTs, allowing an optimized variant (HEA/CNT-10) to demonstrate superior performance in oxygen and hydrogen evolution reactions (OER and HER), showing low overpotentials of 30.7 mV for OER and 330 mV for HER.
  • The composite exhibits a lower voltage requirement of 0.1 V for HzOR compared to the 1.56

Article Abstract

Herein, multi-walled carbon nanotubes (CNT) embedded with RuPdIrPtAu-high entropy alloys (HEA) via pulsed laser irradiation in liquids are successfully fabricated. The resultant composite synergistically enhances hydrazine oxidation reaction (HzOR)-boosted water electrolysis. Notably, HEA with ≈2-5 nm size, are uniformly distributed across the surface of the CNTs. An optimized HEA/CNT-10 demonstrates exceptional performance in oxygen and hydrogen evolution reactions (OER and HER), depicted by ultralow overpotentials of 30.7 and 330 mV at 10 mA cm, respectively. By replacing OER with HzOR, HEA/CNT-10 needs a lower potential of 0.1 V to accomplish 10 mA cm, as compared to OER (1.56 V vs. RHE). Moreover, the hydrazine splitting electrolyzer desirable a small voltage of 0.242 V to attain 10 mA cm, while maintaining exceptional stability. Experimental and DFT studies validate the cocktail effects and role of multiple metal-sites in HEA/CNT-10, which significantly enhance the efficiency of parallel HER||HzOR processes, highlighting its potential in energy-efficient, hydrogen production. In situ Raman probe indicated the configuration of an acidic environment, monitoring of HO, during HER, despite the basic conditions. This is attributed to the dominance of the Heyrovsky step, facilitated by the high catalytic activity of the HEA, coupled with protonation of the CNT surface.

Download full-text PDF

Source
http://dx.doi.org/10.1002/smll.202410304DOI Listing

Publication Analysis

Top Keywords

hydrazine splitting
8
cocktail 4d/5d
4
4d/5d band
4
band twisted
4
twisted high-entropy
4
high-entropy alloys
4
alloys carbon
4
carbon nanotube
4
nanotube hydrazine
4
splitting multi-walled
4

Similar Publications

Article Synopsis
  • Multi-walled carbon nanotubes (CNT) are embedded with RuPdIrPtAu high entropy alloys (HEA) using pulsed laser irradiation in liquids, resulting in a composite that enhances hydrazine oxidation reactions (HzOR) for improved water electrolysis.
  • HEA particles, sized around 2-5 nm, are effectively dispersed on the CNTs, allowing an optimized variant (HEA/CNT-10) to demonstrate superior performance in oxygen and hydrogen evolution reactions (OER and HER), showing low overpotentials of 30.7 mV for OER and 330 mV for HER.
  • The composite exhibits a lower voltage requirement of 0.1 V for HzOR compared to the 1.56
View Article and Find Full Text PDF

Asymmetric Rh-O-Co bridge sites enable superior bifunctional catalysis for hydrazine-assisted hydrogen production.

Chem Sci

December 2024

Jiangsu Key Laboratory of New Power Batteries, Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University Nanjing 210023 China

Hydrazine-assisted water splitting is a promising strategy for energy-efficient hydrogen production, yet challenges remain in developing effective catalysts that can concurrently catalyze both the hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR) in acidic media. Herein, we report an effective bifunctional catalyst consisting of Rh clusters anchored on CoO branched nanosheets (Rh-CoO BNSs) synthesized an innovative arginine-induced strategy. The Rh-CoO BNSs exhibit unique Rh-O-Co interfacial sites that facilitate charge redistribution between Rh clusters and the CoO substrate, thereby optimizing their valence electronic structures.

View Article and Find Full Text PDF

High-Entropy Alloy Nanoflower Array Electrodes with Optimizable Reaction Pathways for Low-Voltage Hydrogen Production at Industrial-Grade Current Density.

Adv Mater

December 2024

Beijing Key Laboratory of Theory and Technology for Advanced Batteries Materials, School of Materials Science and Engineering, Peking University, Beijing, 100871, China.

Developing sufficiently effective non-precious metal catalysts for large-current-density hydrogen production is highly significant but challenging, especially in low-voltage hydrogen production systems. Here, we innovatively report high-entropy alloy nanoflower array (HEANFA) electrodes with optimizable reaction pathways for hydrazine oxidation-assisted hydrogen production at industrial-grade current densities. Atomic-resolution structural analyses confirm the single-phase solid-solution structure of HEANFA.

View Article and Find Full Text PDF

Integrated System for Photocatalytic Overall Water Splitting from Arid Air.

Nano Lett

December 2024

International Research Center for Renewable Energy & State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, People's Republic of China.

H produced through photocatalytic overall water splitting represents a sustainable energy. However, this approach is geographically constrained by freshwater availability, worsening the crisis in arid regions with abundant solar energy. This study introduces a MOF-801-hydrazine-SrTiO:Al (MS) composite for in situ photocatalytic H production using only atmospheric water and sunlight.

View Article and Find Full Text PDF
Article Synopsis
  • - This study introduces a quick method to turn bimetallic NiCo-oxides into trimetallic NiCoPt alloys using a pulsed laser in ethanol, showcasing the efficiency of the resulting NiCoPt-10 alloy in catalyzing hydrogen evolution and hydrazine oxidation reactions.
  • - The NiCoPt-10 alloy achieves impressive electrochemical performance with low overpotentials (90 mV for HER and 0.068 V for HzOR) and operates successfully in a specific electrolyzer setup, requiring only 0.295 V to produce 10 mA·cm.
  • - The research highlights the dual-functional capabilities of the NiCoPt-10 catalyst in both hydrogen production and as the cathode
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!