The direct epitaxial growth of high-quality III-V semiconductors on Si is a challenging materials science problem with a number of applications in optoelectronic devices, such as solar cells and on-chip lasers. We report the reduction of dislocation density in GaAs solar cells grown directly on nanopatterned V-groove Si substrates by metal-organic vapor-phase epitaxy. Starting from a template of GaP on V-groove Si, we achieved a low threading dislocation density (TDD) of 3 × 10 cm in the GaAs by performing thermal cycle annealing of the GaAs followed by growth of InGaAs dislocation filter layers. This approach eliminates the need for a metamorphic buffer to directly integrate low-TDD GaAs on Si. We used these low-TDD GaAs/V-groove Si templates to grow GaAs double heterostructures that had a minority carrier lifetime of 5.7 ns, as measured by time-resolved photoluminescence, a value consistent with the material quality associated with a 20%+ efficient GaAs solar cell. However, front-junction GaAs solar cells grown on these low-TDD substrates produced a conversion efficiency of only 6.6% without an antireflection coating. Electron channeling contrast imaging measurements on this cell showed a high density of misfit dislocations at the interface between the AlInP/GaInP window layer and the GaAs absorber and between the GaAs absorber and the GaInP back surface field (BSF), likely causing a high surface recombination velocity and thus poor performance. We showed that we could reduce (and in the case of the BSF, eliminate) these dislocations by employing an AlGaAs-based window layer and BSF. Compared to GaInP, AlGaAs has dislocation glide properties that are more similar to those of GaAs, resulting in more even threading dislocation glide between layers. AlGaAs passivation improved the external quantum efficiency and open-circuit voltage of the devices, but the overall device performance was still low at an efficiency of 7.7% without an antireflection coating, likely due to cracking in the devices. This work demonstrates a route to high material quality in GaAs grown directly on Si that can be used for the production of III-V/Si optoelectronic devices.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.4c18928DOI Listing

Publication Analysis

Top Keywords

gaas solar
16
solar cells
16
gaas
12
cells grown
12
grown directly
12
v-groove substrates
8
optoelectronic devices
8
dislocation density
8
threading dislocation
8
material quality
8

Similar Publications

GaAs Solar Cells Grown Directly on V-Groove Si Substrates.

ACS Appl Mater Interfaces

December 2024

National Renewable Energy Laboratory, Golden, Colorado 80401, United States.

The direct epitaxial growth of high-quality III-V semiconductors on Si is a challenging materials science problem with a number of applications in optoelectronic devices, such as solar cells and on-chip lasers. We report the reduction of dislocation density in GaAs solar cells grown directly on nanopatterned V-groove Si substrates by metal-organic vapor-phase epitaxy. Starting from a template of GaP on V-groove Si, we achieved a low threading dislocation density (TDD) of 3 × 10 cm in the GaAs by performing thermal cycle annealing of the GaAs followed by growth of InGaAs dislocation filter layers.

View Article and Find Full Text PDF

Precise material design and surface engineering play a crucial role in enhancing the performance of optoelectronic devices. These efforts are undertaken to particularly control the optoelectronic properties and regulate charge carrier dynamics at the surface and interface. In this study, we used ultrafast scanning electron microscopy (USEM), which is a powerful and highly sensitive surface tool that provides unique information about the photoactive charge dynamics of material surfaces selectively and spontaneously in real time and space in high spatial and temporal resolution.

View Article and Find Full Text PDF

Protection Materials on III-V Semiconductors for Photoelectrochemical CO Reduction.

J Phys Chem C Nanomater Interfaces

December 2024

Department of Physics, Technical University of Denmark, Fysikvej 307, 2800 Kongens Lyngby, Denmark.

Article Synopsis
  • * A specific structure with 150 nm TiO, 8 nm TaO, and 150 nm copper nanocubes showed a faradaic efficiency of 24% under certain conditions when integrated into a photoelectrochemical flow reactor.
  • * Directly attaching copper nanocubes to just the TiO layer led to hydrogen production instead of CO reduction, and further studies indicate that the loss of selectivity is related to small copper particle redeposition without changes in the TiO's
View Article and Find Full Text PDF

In this paper, we introduce an entirely new solar absorber design-a multi-layer periodic stacked structure. Through coupling effects, this design has perfect ultra-wideband absorption characteristics. The absorber structure is composed of four absorption units with varying cycle lengths, which are cyclically stacked on the surface of the refractory metal Cr.

View Article and Find Full Text PDF

This study investigates the application of dielectric composite nanostructures (DCNs) to enhance both antireflection and absorption properties in thin film GaAs solar cells, which are crucial for reducing production costs and improving energy conversion efficiency in photovoltaic devices. Building upon previous experimental validations, this work systematically explores the underlying theoretical mechanisms using the finite difference time domain (FDTD) method to analyze the light interaction with the proposed DCNs. The results show that the combination of Mie resonance, Fabry-Perot resonance, and guided resonance, induced by the surface structuring of the DCNs, significantly enhances light absorption in the active layer, particularly at longer wavelengths.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!