Surface passivation with multifunctional molecules is an effective strategy to mitigate the defect and improve the performance and stability of perovskite solar cells (PSCs). Here, the fabrication of a wide bandgap-PSC is reported with tin perovskite (WB-Sn-HP; bandgap: 1.68 eV), followed by molecular surface passivation using 4-Fluoro-benzohydrazide (F-BHZ). WB-Sn-PSC has demonstrated a promising device efficiency of 11.14% with improved device stability. The key to enhancing device performance lies in the meticulous engineering of both surface and bulk properties of WB-Sn-HP film with F-BHZ treatment as a consequence of stronger electrostatic potential and molecular interaction with hydrazine and carbonyl functionalities. A compact perovskite film and highly crystalline film growth results in a longer carrier lifetime and surface defect mitigation with the control of Sn oxidation as supported by theoretical calculations. This work underlines the promising potential of chemical engineering to improve the device performance of WB-Sn-PSC and stability using multifunctional passivating molecules.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.202410048 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Bithiophene Imide-Based Self-Assembled Monolayers (SAMs) on NiOx for High-Performance Tin Perovskite Solar Cells Fabricated Using a Two-Step Approach.
ACS Appl Mater Interfaces
December 2024
Department of Applied Chemistry and Institute of Molecular Science, National Yang Ming Chiao Tung University, 1001 Ta-Hseuh Road, Hsinchu 300093, Taiwan.
Three new bithiophene imide (BTI)-based organic small molecules, (), (), and (), with varied alkyl side chains, were developed and employed as self-assembled monolayers (SAMs) applied to NiOx films in tin perovskite solar cells (TPSCs). The NiOx layer has the effect of modifying the hydrophilicity and the surface roughness of ITO for SAM to uniformly deposit on it. The side chains of the SAM molecules play a vital role in the formation of a high-quality perovskite layer in TPSCs.
View Article and Find Full Text PDFSteering perovskite precursor solutions for multijunction photovoltaics.
Nature
December 2024
Clarendon Laboratory, Department of Physics, University of Oxford, Oxford, UK.
Multijunction photovoltaics (PVs) are gaining prominence owing to their superior capability of achieving power conversion efficiencies (PCEs) beyond the radiative limit of single-junction cells, where improving narrow bandgap tin-lead perovskites is critical for thin-film devices. With a focus on understanding the chemistry of tin-lead perovskite precursor solutions, we herein find that Sn(II) species dominate interactions with precursors and additives and uncover the exclusive role of carboxylic acid in regulating solution colloidal properties and film crystallisation, and ammonium in improving film optoelectronic properties. Materials that combine these two function groups, amino acid salts, considerably improve the semiconducting quality and homogeneity of perovskite films, surpassing the effect of the individual functional groups when introduced as part of separate molecules.
View Article and Find Full Text PDF1.4% External Quantum Efficiency 988 nm Light Emitting Diode Based on Tin-Lead Halide Perovskite.
Adv Mater
December 2024
Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 3, Groningen, 9747 AG, The Netherlands.
In recent years, metal halide perovskite-based light-emitting diodes (LEDs) have garnered significant attention as they display high quantum efficiency, good spectral tunability, and are expected to have low processing costs. When the peak emission wavelength is beyond 900 nm the interest is even higher because of the critical importance of this wavelength for biomedical imaging, night vision, and sensing. However, many challenges persist in fabricating these high-performance NIR LEDs, particularly for wavelengths above 950 nm, which appear to be limited by low radiance and poor stability.
View Article and Find Full Text PDFBright and Efficient CsSnBr Light-Emitting Diodes Enabled by Interfacial Reaction-Assisted Crystallization.
Adv Mater
December 2024
State Key Laboratory of Silicon and Advanced Semiconductor Materials, Zhejiang Key Laboratory of Excited-State Energy Conversion and Energy Storage, Department of Chemistry, Zhejiang University, Hangzhou, 310027, China.
Tin-based perovskites are more environmentally friendly than their lead-based alternatives. Perovskite light-emitting diodes (PeLEDs) using iodide-based tin perovskites have achieved considerable advancements in efficiency. However, PeLEDs using bromide-based tin perovskites have not progressed as rapidly, primarily due to challenges in controlling their crystallization processes.
View Article and Find Full Text PDFBuried hole-selective interface engineering for high-efficiency tin-lead perovskite solar cells with enhanced interfacial chemical stability.
Sci Bull (Beijing)
December 2024
Key Lab for Special Functional Materials of Ministry of Education, National & Local Joint Engineering Research Center for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, and Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, China. Electronic address:
Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation at the buried interface of perovskite. Here we designed a self-assembled material 4-(9H-carbozol-9-yl)phenylboronic acid (4PBA) for the surface modification of the substrate as the hole-selective contact.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!