Introduction: Weeds seriously affect crop yield in global agricultural production. Paraquat (PQ), as one of low cost and highly effective herbicide, is forbidden or severely restricted in production and sales owing to its lethal toxicity to humans. Creating an efficient and bio-friendly PQ formulation is crucial to facilitate the open use of PQ in world's agriculture.
Objectives: This study aims to construct one intelligent and bio-friendly mesoporous carbon nanoparticles (MCN) nanoherbicides coated with α-CD polymer (CDP) gatekeepers.
Methods: MCN was prepared through the low-concentration hydrothermal way, calcined and carbonized. PEG stalks were immobilized on MCN surface by amidation reaction. The PQ was trapped in the MCN pores via physical diffusion adsorption and the robust π-π effects between electron-deficient PQ and electron-rich MCN. CDP gatekeepers were fastened via host-guest effects between the chamber of α-CD units and PEG stalks.
Results: The PQ-loaded MCN-PEG@CDP nanoherbicides integrated with multi-stimuli responses to amylase, elevated temperature under sunlight, and competitors at leaf interface to control the PQ release for efficient weed control, while appeared low PQ leakage under the simulated human gastric or intestinal conditions, low cytotoxicity to human normal cells in vitro, and high mouse survival rate in vivo. Even through the nanoherbicides inevitably contact with water or intake by beneficial insects, they appear good biosafety on zebrafish (D. rerio) and honeybees (Apis mellifera L.).
Conclusion: The as-prepared nanoherbicides have high herbicidal efficacy and low risks to non-target species, and could promote the open use of PQ in agriculture.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jare.2024.12.005 | DOI Listing |
Polymers (Basel)
December 2024
School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China.
In this study, CO reacted with a curing agent through nucleophilic addition to form ammonium salts, enabling the stable capture and internal release of CO, which achieved gas-phase nucleation and foaming. Additionally, the introduction of wave-absorbing agents improved the absorption mechanism and promoted uniform foaming. This nucleation-free foaming process relies on the induced growth of gas nuclei and the synergistic effect of the wave-absorbing agents, effectively preventing the uneven foaming issues caused by traditional nucleating agents.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
College of Polymer Science & Engineering, Sichuan University, Chengdu 610065, China.
Poor breathability, inadequate flexibility, bulky wearability, and insufficient gas-adsorption capacity always limit the developments and applications of conventional chemical protective clothing (CPC). To create a lightweight, breathable, and flexible fabric with a high gas-absorption capacity, activated carbon (AC)-loaded poly(m-phenylene isophthalamide) (PMIA) porous composite fibres were fabricated from a mixed wet-spinning process integrated with a solvent-free phase separation process. By manipulating the pore parameters of as-spun composite fibres, the exposure-immobilization of AC particles on the fibre surface can offer a higher gas-absorption capacity and better AC-loading stability.
View Article and Find Full Text PDFMolecules
December 2024
State Key Laboratory of Continental Shale Oil, Northeast Petroleum University, Daqing 163318, China.
Due to the complex physical properties of low-permeability glutenite reservoirs, the oil recovery rate with conventional development is low. Surfactants are effective additives for enhanced oil recovery (EOR) due to their good ability of wettability alteration and interfacial tension (IFT) reduction, but the reason why imbibition efficiencies vary with different types of surfactants and the mechanism of enhanced imbibition in the glutenite reservoirs is not clear. In this study, the imbibition efficiency and recovery of surfactants including the nonionic, anionic, and cationic surfactants as well as nanofluids were evaluated and compared with produced water (PW) using low-permeability glutenite core samples from the Lower Urho Formation in the Mahu oil field.
View Article and Find Full Text PDFMolecules
December 2024
State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China.
In this research, we produced two types of biochar (BC) using cotton stalks as raw material and KOH as an activator, and compared their performance and adsorption mechanisms in the removal of tetracycline (TC) and methylene blue (MB) from wastewater. The results showed that the biochar generated using both procedures formed pores that connected to the interior of the biochar and had extensive microporous and mesoporous structures. The molten salt approach produces biochar with a higher specific surface area, larger pore size, and higher pore volume than the impregnation method, with a maximum specific surface area of 3095 m/g.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Institute of Nuclear Physics Polish Academy of Sciences, 31-342 Krakow, Poland.
The resistivity of the silica SBA-15 type can be significantly improved by forming a thin layer of carbon on the pore surface. This is possible through the carbonization reaction of a surfactant used as a structure-directing agent in the synthesis of mesostructured silica materials. The synthesis of this type of silica-carbon composite (SBA-C) is based on the use of sulfuric acid to create a carbon layer from surfactant molecules encapsulated in silica mesopores.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!