Bioactive glasses and glass-ceramics exhibit osteoconductivity, which is the ability to form a direct bond with living bone tissue. This property is typically assessed by observing the formation of a hydroxyapatite layer using simulated body fluid (SBF), a solution designed to mimic the inorganic constituents of human blood plasma. SBF was developed by Kokubo (T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi and T. Yamamuro, , 1990, , 721-734), and its preparation and storage procedures are precisely regulated according to ISO 23317. However, despite following the regulations, SBF may precipitate during storage owing to local ion concentration fluctuations during preparation because it is a supersaturated solution of hydroxyapatite. The present study is focused on designing a preparation process that enhances the stability of SBF-type biomimetic solutions. Solutions with a nominal composition that is the same as that of SBF were prepared by mixing stock solutions containing calcium or phosphate ions separately. Depending on the preparation procedure, two types of solutions-modified biomimetic solution (mBS) and evolved biomimetic solution (eBS)-were proposed. To evaluate the stability of these solutions, variants with 1.5 times the concentration of the original solutions were prepared, and the prepared solutions were denoted as SBF, mBS, and eBS (where = 1.0 or 1.5). It was found that the formation of calcium phosphate precipitates in 1.5mBS and 1.5eBS was slower than that in 1.5SBF. Additionally, the precipitate in 1.5eBS exhibited a different morphology from hydroxyapatite precipitate, which may be due to a higher hydrogencarbonate concentration than that in 1.5SBF. eBS demonstrated increased stability and a higher concentration of carbonic acid species (carbonate ions) than SBF, while mBS showed increased stability with a lower carbonate concentration than SBF. The newly proposed routes allow the production of an aqueous solution supersaturated with hydroxyapatite as a conventional SBF that has the potential to evaluate apatite formation examination under high initial stability.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11626438 | PMC |
http://dx.doi.org/10.1039/d4ra07739c | DOI Listing |
Exp Brain Res
January 2025
Institute for Experimental Psychology, Heinrich Heine University Düsseldorf, 40225, Düsseldorf, Germany.
When we touch ourselves, the pressure appears weaker compared to when someone else touches us, an effect known as sensory attenuation. Sensory attenuation is spatially tuned and does only occur if the positions of the touching and the touched body-party spatially coincide. Here, we ask about the contribution of visual or proprioceptive signals to determine self-touch.
View Article and Find Full Text PDFJ Clin Med
December 2024
Department of Anaesthesiology and Intensive Care, Hospital Canselor Tuanku Muhriz, Universiti Kebangsaan Malaysia, Kuala Lumpur 56000, Malaysia.
Regional anaesthesia has seen a resurgence of sorts since the widespread advent of ultrasound into clinical practice. The ability to access hitherto inaccessible nerves and fascial planes in the human body whilst ensuring visualisation of the needle tip during block performance has opened the proverbial floodgates leading to its widespread adoption, further supported by a growing body of evidence for its many benefits in a patient's perioperative journey and pain management. The concomitant advancement of technology and the development of powerful simulation and artificial intelligence tools has given a much-needed impetus towards improving training and safe practice in regional anaesthesia.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Electrical Engineering, Technical University Eindhoven, 5612 AZ Eindhoven, The Netherlands.
The effects of mechanical vibrations on control system stability could be significant in control systems designed on the assumption of rigid-body dynamics, such as launch vehicles. Vibrational loads can also cause damage to launch vehicles due to fatigue or excitation of structural resonances. This paper investigates a method to control structural vibrations in real time using a finite number of strain measurements from a fiber Bragg grating (FBG) sensor array.
View Article and Find Full Text PDFSensors (Basel)
December 2024
Department of Engineering, University of Exeter, Exeter EX4 4QF, UK.
A rapidly growing body of experimental evidence in the literature shows that the effects of humans interacting with vibrating structures, other humans, and their surrounding environment can be critical for reliable estimation of structural vibrations. The Interaction-based Vibration Serviceability Assessment framework (I-VSA) was proposed by the authors in 2017 to address this, taking into account human-structure dynamic interactions (HSI) to simulate the structural vibrations experienced by each occupant/pedestrian. The I-VSA method, however, had limited provisions to simulate simultaneously multiple modes of structure in HSI, to simulate human-human and human-environment interactions, and the movement pattern of the occupants/pedestrians.
View Article and Find Full Text PDFFoods
December 2024
Faculty for Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia.
Chocolate is one of the most popular and widely consumed confectionery products. However, elevated cadmium (Cd) content in this commodity threatens food safety and human health. It is crucial to monitor the presence of Cd in chocolate and to evaluate its associated health risks.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!