This study investigates the use of various industrial waste materials-silica fume (SF), cement kiln dust (CKD), calcium carbide residue (CCR), rice husk ash (RHA), and ground granulated blast furnace slag (GGBS)-as eco-friendly stabilizers for expansive clay soil (ECS). Laboratory tests were conducted to assess the impact of different proportions (3 %, 6 %, and 9 %) of these additives on the soil's physical, mechanical, and microstructural properties. Results indicated that the inclusion of industrial waste significantly improved the soil's behavior, with notable reductions in liquid limit (up to 37.66 %), plasticity index (up to 74.76 %), and swell potential. Additionally, unconfined compressive strength (UCS) and shear strength increased substantially, with UCS values rising from 114.64 kPa to 1582.91 kPa at 30 days of curing for 9 % GGBS. Microstructural analyses confirmed the formation of cementitious compounds, which enhanced soil particle bonding and durability. These findings suggest that industrial waste materials can serve as effective and sustainable alternatives to traditional soil stabilizers, offering both performance improvements and environmental benefits.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11620038 | PMC |
| http://dx.doi.org/10.1016/j.heliyon.2024.e39124 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
AI-driven identification of a novel malate structure from recycled lithium-ion batteries.
Environ Res
December 2024
INSTM and Chemistry for Technologies Laboratory, Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, 25123, Brescia, Italy. Electronic address:
The integration of Artificial Intelligence (AI) into the discovery of new materials offers significant potential for advancing sustainable technologies. This paper presents a novel approach leveraging AI-driven methodologies to identify a new malate structure derived from the treatment of spent lithium-ion batteries. By analysing bibliographic data and incorporating domain-specific knowledge, AI facilitated the identification and structure refinement of a new malate complex containing different metals (Ni, Mn, Co, and Cu).
View Article and Find Full Text PDFEnhanced physicochemical and antifungal properties of starch bionanocomposites reinforced with nanocellulose and functionalized with AgNPs derived from cocoa bean shell.
Int J Biol Macromol
December 2024
Biotransformation and Organic Biocatalysis Research Group, Department of Exact Sciences, Santa Cruz State University, 45654-370 Ilhéus, Brazil. Electronic address:
This study explored the synergistic combination of silver nanoparticles (AgNPs), eucalyptus-derived nanofibrillated cellulose (NFC) and cassava starch to develop bionanocomposites with advanced properties suitable for sustainable and antifungal packaging applications. The influence of AgNPs synthesized through a green method using cocoa bean shell combined with varying concentrations of NFC were investigated. Morphological (scanning electron microscopy and atomic force microscopy), optical (L*, C*, °hue, and opacity), chemical (Fourier transform infrared spectroscopy), mechanical (puncture force, tensile strength, and Young's modulus), rheological (flow curve and frequency sweeps, strain, and stress), barrier, and hydrophilicity properties (water vapor permeability, solubility, wettability, and contact angle), as well as the antifungal effect against pathogens (Botrytis cinerea, Penicillium expansum, Colletotrichum musae, and Fusarium semitectum), were analyzed.
View Article and Find Full Text PDFFunctional microorganisms in hydrogen production: Mechanisms and applications.
Bioresour Technol
December 2024
Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China.
The rapid growth of global energy demand accelerates the development of sustainable, clean, and renewable energy sources. Biohydrogen production, driven by functional microorganisms, offers a promising solution. Multiple species of bacteria, fungi, microalgae, and archaea were able to produce hydrogen.
View Article and Find Full Text PDFEnergy production and denitrogenation performance by sludge biochar based constructed wetlands-microbial fuel cells system: Overcoming carbon constraints in water.
Water Res
December 2024
Xiamen Key Laboratory of Municipal and Industrial Solid Waste Utilization and Pollution Control, College of Civil Engineering, Huaqiao University, Xiamen, Fujian 361021, PR China; Key Laboratory of Songliao Aquatic Environment, Ministry of Education, Jilin Jianzhu University, Changchun, 130118, PR China. Electronic address:
As freshwater demand grows globally, using reclaimed water in natural water bodies has become essential. Constructed wetlands (CWs) are widely used for advanced wastewater treatment due to their environmental benefits. However, low carbon/nitrogen (C/N) ratios in wastewater limit nitrogen removal, often leading to eutrophication.
View Article and Find Full Text PDFModelling and set-point definition for the development of a joint control system of two interconnected wastewater treatment plants and its application in practice.
Water Sci Technol
December 2024
Kompetenzzentrum Wasser Berlin gGmbH, Grunewaldstr. 61-62, Berlin 10825, Germany.
The use of activated sludge models (ASMs) is a common way in the field of wastewater engineering in terms of plant design, development, optimization, and testing of stand-alone treatment plants. The focus of this study was the development of a joint control system (JCS) for a municipal wastewater treatment plant (mWWTP) and an upstream industrial wastewater treatment plant (iWWTP) to create synergies for saving aeration energy. Therefore, an ASM3 + BioP model of the mWWTP was developed to test different scenarios and to find the best set-points for the novel JCS.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!