AI Article Synopsis

  • - This study explores using electrochemical oxidation of glycerol as a sustainable method to create valuable chemicals while improving energy efficiency in electrolysis.
  • - A novel catalyst, CoNA-NiOH/NF-2, utilizing nickel (oxy)hydroxide supported cobalt nanoneedle arrays, shows enhanced performance in glycerol oxidation by increasing active sites and reducing energy consumption.
  • - The catalyst achieves significant results with low voltages for current densities—demonstrating a 98% Faraday efficiency for formate production—offering a promising alternative to conventional oxygen evolution reactions (OER) in renewable energy applications.

Article Abstract

Electrochemical oxidation of glycerol into value-added chemicals represents a sustainable approach for not only valorizing biomass resources but also improving the energy efficiency of electrolysis by replacing the kinetically sluggish oxidation of water at the anode. Here, we present a nickel (oxy)hydroxide supported cobalt nanoneedle arrays catalyst (CoNA-NiOH/NF-2) for effective oxidation of glycerol. The loaded Co(OH) forms more oxygen defects, increases the active sites, and enhances the performance of glycerol oxidation. The CoNA-NiOH/NF-2 catalyst significantly reduces energy consumption by achieving a current density of 10 mA cm at a low voltage of 1.22 V vs. RHE, and 100 mA cm at 1.42 V vs. RHE, which is approximately 240 mV lower than oxygen evolution reaction (OER). Additionally, the Faraday efficiency of formate generation reached 98 %. The growth of renewable energy sources will greatly benefit from this strategy, which calls for replacing anodic OER with biomass oxidation.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2024.11.194DOI Listing

Publication Analysis

Top Keywords

nickel oxyhydroxide
8
oxyhydroxide supported
8
supported cobalt
8
cobalt nanoneedle
8
nanoneedle arrays
8
oxidation glycerol
8
oxidation
5
efficient electrocatalysis
4
electrocatalysis conversion
4
glycerol
4

Similar Publications

Electrochemical water splitting is a promising method for the generation of "green hydrogen", a renewable and sustainable energy source. However, the complex, multistep synthesis processes, often involving hazardous or expensive chemicals, limit its broader adoption. Herein, a nitrate (NO) anion-intercalated nickel-iron-cerium mixed-metal (oxy)hydroxide heterostructure electrocatalyst is fabricated on nickel foam (NiFeCeOH@NF) via a simple electrodeposition method followed by cyclic voltammetry activation to enhance its surface properties.

View Article and Find Full Text PDF

The second 3d-transition metal incorporation in Ni-(oxy)hydroxide has a drastic effect on alkaline OER and alcohol dehydrogenation reactivity. While Mn incorporation suppresses the alkaline OER, it greatly improves the alcohol dehydrogenation reactivity. A complete reversal of reactivity is obtained when Fe is incorporated, which shows better performance for alkaline OER with poor alcohol dehydrogenation reactivity.

View Article and Find Full Text PDF

Construction of crystalline/amorphous NiP/FePO/graphene heterostructure by microwave irradiation for efficient oxygen evolution.

J Colloid Interface Sci

December 2024

Key Laboratory of Synthetic and Natural Functional Molecule of the Ministry of Education, College of Chemistry and Materials Science, Northwest University, Xi'an 710127, China; Shaanxi Key Laboratory for Carbon Neutral Technology, Northwest University, Xi'an 710127, China. Electronic address:

The rational design of highly efficient and cost-effective oxygen evolution reaction (OER) electrocatalysts is crucial for hydrogen production through electrocatalytic water splitting. Although the crystalline/amorphous heterostructure shows great potential in enhancing OER activity, its fabrication presents significantly greater challenges compared to that of crystalline/crystalline heterostructures. Herein, a microwave irradiation strategy is developed to construct reduced graphene oxide supported crystalline NiP/amorphous FePO heterostructure (NiP/FePO/RGO) as an efficient OER electrocatalyst.

View Article and Find Full Text PDF

Anodic Activation of Prussian Blue Analog Leads to Highly Active Cobalt-Doped Nickel (Oxy)Hydroxide for Organic Oxidation Reactions.

Chemistry

December 2024

Material Chemistry Group for Thin Film Catalysis, CatLab, Helmholtz-Zentrum Berlin für Materialien und Energie, Albert-Einstein-Str. 15, 12489, Berlin, Germany.

Water-assisted electrocatalytic oxidation of alcohols into valuable chemicals is a promising strategy to circumvent the sluggish kinetics of water oxidation, while also reducing cell voltage and improving energy efficiency. Recently, transition metal (TM)-based catalysts have been investigated for anodic alcohol oxidation, but success has been limited due to competition from the oxygen evolution reaction (OER) within the working regime. In this study, NiCo-based Prussian blue analog (PBA) was electrochemically activated at the anodic potential to produce a Co-Ni(O)OH active catalyst with a nanosheet-like architecture.

View Article and Find Full Text PDF

Electronic Buffering Mechanism Enhances Stability and Water Oxidation Efficiency of CeO2@NiFe-LDH.

Chemistry

December 2024

Shanghai University of Electric Power, College of Environmental and Chemical Engineering, 2103 Pingliang Road, Yangpu District,, 200090, Shanghai, CHINA.

Nickel-iron layered double hydroxide shows significant promise as an electrocatalyst in facilitating oxygen evolution reactions. But its development is hindered by low conductivity and insufficient cycling stability. Herein, the synthesis of a hierarchically structured heterostructure catalyst, CeO2@NiFe LDH, is reported through a straightforward two-step process involving hydrothermal treatment.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!