Electric vehicles equipped with regenerative braking systems provide drivers a new driving mode, the one-pedal mode, which enables drivers to accelerate and decelerate with the throttle alone. However, there is a lack of systematic research on driving behavior in one-pedal mode, and whether it actually enhances or reduces safety remains to be validated. A driving simulator was used to analyze driving behavior and safety in the one-pedal mode in situations with different urgency level, with the two-pedal mode (the traditional driving mode in internal combustion engine vehicles) serving as a comparative group. The driver's perception times, initial and final throttle release times, throttle to brake transition times, maximum brake pedal forces, collision ratios, and time-to-collision (TTC) were measured under the lead vehicle decelerating at 0.1 g, 0.2 g, 0.5 g, 0.75 g, as well as uncertainty (decelerating at 0.2 g to 25 km/h, then decelerating at 0.75 g to 0), and under headways of 1.5 s and 2.5 s. Results showed: 1) The regenerative braking system did not affect driver perception and reaction of the lead vehicle braking event and drivers extended throttle release to avoid rapid speed drops when the lead vehicle braked slowly; 2) the one-pedal mode exhibited a longer throttle to brake transition time and increased uncertainty in timing of brake pedal application; 3) the one-pedal mode was safer than the two-pedal mode in low urgency situations but became unsafe in high urgency or uncertain situations due to delayed braking. The implications of this research include enhancing regenerative braking systems and developing forward collision warning systems.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.aap.2024.107832 | DOI Listing |
Accid Anal Prev
February 2025
School of Automotive Studies, Tongji University, No. 4800, Cao-an Road, Shanghai 201804, China.
Front Physiol
November 2021
Neural Control of Movement Laboratory, School of Medicine, Faculty of Science, Medicine and Health, University of Wollongong, Wollongong, NSW, Australia.
Eccentric (ECC) cycling is used in rehabilitation and sports conditioning settings. We present the construction and mode of operation of a custom-built semi-recumbent ECC cycle designed to limit the production of lower limb muscle activity to the phase of the pedal cycle known to produce ECC contractions. A commercially available semi-recumbent frame and seat (Monarch, 837E Semi-recumbent Bike, Sweden) were used to assemble the ergometer.
View Article and Find Full Text PDFEur J Appl Physiol Occup Physiol
December 1996
Laboratoire de Physiologie, Faculté de Medecine, Paris, France.
Eight subjects performed a single allout sprint on a cycle ergometer with strain gauges bonded to the cranks. The crank angle-torque curves of the left and right legs were recorded during ten revolutions using the software package supplied with the ergometer. Torque data were stored every 2 degrees (180 angletorque data per pedal revolution for each leg).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!