In this paper, a wideband optically transparent absorber based on multilayer indium tin oxide (ITO) films is designed, fabricated, and measured. The structure uses polyethylene terephthalate (PET) and ITO films to replace the dielectric substrate and metal pattern of the traditional absorber to achieve optical transparency characteristics. The absorption of the proposed absorber is above 90% from 4.92 to 24.55 GHz and exceeding 95% in the range of 5.74 ∼ 21.85 GHz, respectively, under normal transverse electric (TE) and transverse magnetic (TM) polarized incidences. Moreover, it shows outstanding stability with various incident angles over a wide range. A prototype of the proposed absorber is fabricated and experimentally verified, with good measurement results. The optical transparency and great absorption performance make the absorber a promising candidate for transparent electromagnetic compatibility.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.533365 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrosynthesis of Ru (II)-Polypyridyl Oligomeric Films on ITO Electrode for Two Terminal Non-Volatile Memory Devices and Neuromorphic Computing.
Small Methods
January 2025
Department of Chemistry, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, 208016, India.
Molecular electronics exhibiting resistive-switching memory features hold great promise for the next generation of digital technology. In this work, electrosynthesis of ruthenium polypyridyl nanoscale oligomeric films is demonstrated on an indium tin oxide (ITO) electrode followed by an ITO top contact deposition yielding large-scale (junction area = 0.7 × 0.
View Article and Find Full Text PDFStructure-directing effect of terephthalate in bridging Zn(II)- and Cd(II)-based coordination polymers towards application in the detection of trace quantities of Pd in aqueous media and their electrical conductivities.
Dalton Trans
January 2025
Department of Chemistry, School of Applied Sciences, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University, Bhubaneswar 751024, Odisha, India.
Energy crisis and environmental pollution are two central themes of contemporary research towards achieving sustainable development goals (SDGs). Material chemistry is the chief discipline that can resolve glitches in these areas through the appropriate design of chemical compounds with multifunctional properties. In this regard, two stable coordination polymers (CPs) were synthesised in this work using Zn(II) (3d) and Cd(II) (d) metal nodes with 1,4-benzenedicarboxylate () as the bridging ligand and monodentate pyridyl-N coordinated 9-fluoren-2-yl-pyridin-4-ylmethylene-amine (flpy) as the fluorogenic partner.
View Article and Find Full Text PDFSynergistic Improvement of Narrow Bandgap PbS Quantum Dot Solar Cells through Surface Ligand Engineering, Near-Infrared Spectral Matching, and Enhanced Electrode Transparency.
ACS Appl Mater Interfaces
January 2025
CSIR-National Chemical Laboratory, Dr. Homi Bhabha Road, Pune 411008, India.
The tunability of the energy bandgap in the near-infrared (NIR) range uniquely positions colloidal lead sulfide (PbS) quantum dots (QDs) as a versatile material to enhance the performance of existing perovskite and silicon solar cells in tandem architectures. The desired narrow bandgap (NBG) PbS QDs exhibit polar (111) and nonpolar (100) terminal facets, making effective surface passivation through ligand engineering highly challenging. Despite recent breakthroughs in surface ligand engineering, NBG PbS QDs suffer from uncontrolled agglomeration in solid films, leading to increased energy disorder and trap formation.
View Article and Find Full Text PDFFluorescent nanodiamond scintillators for beam diagnostics of EUV and soft X-ray in photolithographic applications.
RSC Adv
January 2025
Institute of Atomic and Molecular Sciences, Academia Sinica Taipei 106 Taiwan
Extreme ultraviolet (EUV) lithography is a cutting-edge technology in contemporary semiconductor chip manufacturing. Monitoring the EUV beam profiles is critical to ensuring consistent quality and precision in the manufacturing process. This study uncovers the practical use of fluorescent nanodiamonds (FNDs) coated on optical image sensors for profiling EUV and soft X-ray (SXR) radiation beams.
View Article and Find Full Text PDFSacrificial Layer for Sintering Enhancements of Ceramic, Semiconductor, and Metal Films: A Universal Strategy.
Small
January 2025
School of Energy and Power Engineering, Beihang University, Beijing, 100191, China.
The manufacturing of thin films through selective laser sintering of micro/nanoparticles is an emerging technology that has been developing rapidly over the last two decades owing to its digitization, efficiency, and good adaptability to various materials. However, high-quality laser sintering of different materials remains a challenge: ceramic particles are difficult to be sintered due to low absorbance; metallic particles are prone to oxidation; semiconductor particles are difficult to process for performance enhancement due to high stress. In this work, a new approach is proposed that employs an additional Indium Tin Oxide (ITO) sacrificial layer to assist laser sintering of different functional materials, which detaches after sintering without contaminating the target material.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!