Treatment of molasses-based alcohol distillery wastewater using Electro-Fenton oxidation: Optimization and model prediction by response surface methodology.

In this study, an Electro-Fenton process was employed to treat high-strength alcohol distillery wastewater. The simultaneously removal of chemical oxygen demand (COD), color, and turbidity were examined. The optimum value of the operational parameters including the number of electrodes and their arrangement, electrodes' interval, initial pH, and electrolyte concentration were determined by one-factor-at-a-time (OFAT). The effect of essential parameters including current density, hydrogen peroxide concentration, and the duration of the process were optimized using response surface methodology (RSM). At fixed defined operational conditions by OFAT as four electrodes in a parallel arrangement with a 1 cm interval, 0.3 mol/L of electrolyte salt, and pH of 4, respectively, the optimal condition by RSM suggested the current density of 24 mA/cm, 40 g/L of HO, and reaction time of 2 h. By adopting optimal condition at defined values of operational factors the removal efficiencies for COD, color, and turbidity were approximately 83%, 99%, and 97%, respectively, using fresh water for dilution. The energy consumption of 1.9 kWh/kg COD removal was achieved. Also, to save water, the treated wastewater (instead of fresh water) was used for the dilution of the raw wastewater, indicating the satisfactory results with removal efficiencies for COD, color, and turbidity of 71%, 94%, and 95%, respectively. Overall, the Electro-Fenton process is introduced as an appropriate process for treating high-strength alcohol distillery wastewater.