Objective: To determine the clinical performance of partial coverage restorations (PCR) (onlays, occlusal veneers, and partial crowns) composed of different ceramic and ceramic-based materials to treat extended posterior defects.
Materials And Methods: MEDLINE, Scopus, CENTRAL, ClinicalTrials.gov, and the International Clinical Trials Registry Platform were searched (inception-February 2024) for randomized controlled trials (RCT) comparing posterior PCRs composed of different ceramic and ceramic-based materials with a minimum follow-up of 1 year.
Results: Six RCTs were included. Resin matrix ceramic (RMC) and lithium disilicate (LDS) restorations had a 3-year survival rate of 89.3% (95% CI 76.4-95.3) and 93.7% (95% CI 83.7-97.7), respectively, and leucite-reinforced glass ceramic (LRGC) restorations a range between 96.1% (95% CI 90.1-98.9) compared with RMC and 98.3% (95% CI 90.8-100) compared with LDS. After 1-3 years of follow-up, LDS slightly outperformed RMC on restoration failure and loss of retention (1.56 more failures and 1.78 more loss of retentions for RMC per 100 restoration-years [low certainty evidence]). No statistically significant differences between ceramic and ceramic-based materials were detected in short-term follow-up (1-3 years of follow-up). The long-term performance of posterior PCRs is uncertain.
Conclusion: The survival of LDS restorations may slightly outperform RMC restorations after 3 years of follow-up across outcomes, except for bulk fracture. RCTs providing medium to long-term data are needed.
Clinical Significance: Ceramic and ceramic-based PCRs are a reliable treatment option to restore extended posterior defects.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1111/jerd.13353 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Analysis of bulletproof performance of structurally optimized ceramic composite armor through numerical simulation and live fire test.
Sci Rep
December 2024
Department of Chemistry, Illinois State University, Normal, IL, 61790-4160, USA.
This work aims to address key issues in the ballistic performance of ceramic-based composite armor, particularly at the joints of spliced bulletproof panels. The edge structure of C/C-SiC ceramic plates and ultra-high molecular weight polyethylene is redesigned to superimpose the joint areas. These structurally optimized composite pads are examined by numerical simulation of impact dynamics to understand their anti-penetration performance whose accuracy is then validated by live fire tests.
View Article and Find Full Text PDFDesign and Fabrication of a Patch Antenna for 5G Wireless Communications from a Low-Permittivity LiAlSiO-Based Ceramic.
ACS Appl Mater Interfaces
December 2024
Guangxi Universities Key Laboratory of Non-ferrous Metal Oxide Electronic Functional Materials and Devices, College of Material Science and Engineering, Guilin University of Technology, Guilin 541004, China.
A microwave dielectric ceramic based on lithium aluminum silicate (LiAlSiO) with ultralow permittivity was synthesized using the traditional solid-state reaction technique, and its dielectric characteristics at microwave frequencies are presented. The nominal LiAlSiO ceramic exhibited a relative permittivity of 3.95.
View Article and Find Full Text PDFMargin quality, homogeneity, and internal porosity assessment of experimental short fiber-reinforced CAD/CAM composite.
J Mech Behav Biomed Mater
December 2024
Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC, Institute of Dentistry, University of Turku, Finland; Research Development and Production Department, Stick Tech Ltd-Member of GC Group, Turku, Finland.
Objectives: The aim of this study was to evaluate the margin quality of anterior crowns made of experimental short fiber-reinforced CAD/CAM composite (SFRC CAD) block before and after cyclic fatigue aging. Moreover, to investigate the microstructure, homogeneity, and porosity of the SFRC CAD compared with other commercial CAD/CAM materials.
Methods: 40 anterior crowns were milled from five CAD/CAM blocks divided into five groups (n = 8/group).
Switchable 3D Photonic Crystals Based on the Insulator-to-Metal Transition in VO.
ACS Appl Mater Interfaces
December 2024
Center for Hybrid Nanostructures, Universität Hamburg, Luruper Chaussee 149, 22607 Hamburg, Germany.
Photonic crystals (PhCs) are optical structures characterized by the spatial modulation of the dielectric function, which results in the formation of a photonic band gap (PBG) in the frequency spectrum. This PBG blocks the propagation of light, enabling filtering, confinement, and manipulation of light. Most of the research in this field has concentrated on static PhCs, which have fixed structural and material parameters, leading to a constant PBG.
View Article and Find Full Text PDFSurvival and Complications of Partial Coverage Restorations on Posterior Teeth-A Systematic Review and Meta-Analysis.
J Esthet Restor Dent
November 2024
Department of Prosthodontics, Medical Faculty and University Hospital Düsseldorf, Heinrich-Heine-University Düsseldorf, Düsseldorf, Germany.
Objective: To determine the clinical performance of partial coverage restorations (PCR) (onlays, occlusal veneers, and partial crowns) composed of different ceramic and ceramic-based materials to treat extended posterior defects.
Materials And Methods: MEDLINE, Scopus, CENTRAL, ClinicalTrials.gov, and the International Clinical Trials Registry Platform were searched (inception-February 2024) for randomized controlled trials (RCT) comparing posterior PCRs composed of different ceramic and ceramic-based materials with a minimum follow-up of 1 year.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!