Alcohol-induced dose dumping (AIDD) remains a serious challenge in the controlled delivery of high potency drugs, such as opioids, which requires extensive investigation and innovative solutions. Current technologies rely on ethanol-insoluble excipients, such as guar gum and sodium alginate, to counteract the increased solubility of hydrophobic polymeric excipients in ethanol. However, these excipients pose several shortcomings, such as high viscosity of coating dispersion, high solution temperature, rapid gelation, and heterogeneity of resulted film. In this work, we explored the application of a cross-linked terpolymer nanoparticle (TPN) as an alcohol-resistant excipient in a water-insoluble controlled release film of ethylcellulose (EC) for the prevention of AIDD. Herein, we optimized the composition of TPN using a central composite design (CCD) to minimize swelling and weight loss of TPN-EC film in the presence of 20% ethanol. The optimized TPN showed a negligible effect on the viscosity of the coating dispersion, while guar gum increased the viscosity by 76-fold. Permeability studies in a pH 1.2 media containing 0% or 40% v/v ethanol revealed that cationic drugs (propranolol HCl, diltiazem HCl, and naloxone HCl (an opioid receptor-binding model drug)) exhibited significantly lower permeability ratios (/) than un-ionized drugs (theophylline and salicylic acid). FTIR analysis indicated an increase in ionic hydrogen bonding between TPN and the cationic drug in the presence of ethanol. These results suggest that drug-polymer-solvent interactions play an important role in alcohol-independent drug permeability through the TPN-EC film. By leveraging the drug permeability altering capability of the TPN-EC system, the release of cationic drugs in hydroethanolic media appeared to be suppressed, suggesting a promising new mechanism of alcohol resistance.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.molpharmaceut.4c00706 | DOI Listing |
ACS Appl Mater Interfaces
November 2024
CAS Key Laboratory of Materials for Energy Conversion and Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, 230026, China.
Poly(vinylidenefluoride-trifluoroethylene-chlorotrifluoroethylene) (P(VDF-TrFE-CTFE)) relaxor ferroelectric polymer exhibits a modest electrocaloric effect (ECE) at a low electric field near room temperature and a low thermal conductivity. The low thermal conductivity causes poor heat transfer when the terpolymer is used as a cooling device, even when the ECE of the polymer is substantial. By incorporating aluminum nitride (AlN) nanoparticles, which possess high thermal conductivity and good electrical insulation properties, into polymer matrices, we can enhance both the thermal conductivity and the ECE.
View Article and Find Full Text PDFMol Pharm
December 2024
Advanced Pharmaceutics and Drug Delivery Laboratory, Leslie Dan Faculty of Pharmacy, University of Toronto, Toronto, Ontario M5S 3M2, Canada.
Alcohol-induced dose dumping (AIDD) remains a serious challenge in the controlled delivery of high potency drugs, such as opioids, which requires extensive investigation and innovative solutions. Current technologies rely on ethanol-insoluble excipients, such as guar gum and sodium alginate, to counteract the increased solubility of hydrophobic polymeric excipients in ethanol. However, these excipients pose several shortcomings, such as high viscosity of coating dispersion, high solution temperature, rapid gelation, and heterogeneity of resulted film.
View Article and Find Full Text PDFJ Phys Chem C Nanomater Interfaces
October 2024
FZU-Institute of Physics, Czech Academy of Sciences, Na Slovance 2, 182 21 Prague, Czech Republic.
A novel approach to selectively modify narrow subareas of metallic nanostructures adjacent to plasmonic hotspots, where strong electromagnetic field amplification occurs upon localized surface plasmon (LSP) excitation, is reported. In contrast to surface plasmon-triggered polymerization, it relies on plasmonically enhanced multiphoton crosslinking (MPC) of polymer chains carrying photoactive moieties. When they are contacted with metallic nanostructures and irradiated with a femtosecond near-infrared beam resonantly coupled with LSPs, the enhanced field intensity locally exceeds the threshold and initiates MPC only at plasmonic hotspots.
View Article and Find Full Text PDFNanomaterials (Basel)
October 2024
Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, 48 Vassileos Constantinou Ave., 11635 Athens, Greece.
ACS Macro Lett
August 2024
Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029, PR China.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!