Microfluidic systems incorporating magnetic droplets have emerged as a focal point of significant interest within the biomedical domain. The allure of these systems lies in their capacity to offer precise control, enable contactless operation, and accommodate minimal sample concentration requirements. Such remarkable features serve to mitigate errors arising from human operation and other factors during cell or molecular detection. By providing innovative solutions for molecular diagnostics and immunoassay applications, magnetic droplet microfluidics enhance the accuracy and efficiency of these procedures. This review undertakes a comprehensive examination of the research progress in microfluidic systems centered around magnetic droplets. It adheres to a sequential presentation approach, commencing from the fundamental operation principles, specifically the generation of magnetic droplets on the microfluidic chip, and proceeding to their transmission and mixing within the microchannel an array of operating techniques. Additionally, the relevant detection technologies associated with magnetic drop microfluidics and their numerous applications within the biomedical field are systematically classified and reviewed. The overarching objective of this review is to spotlight key advancements and offer valuable insights into the future trajectory of this burgeoning field.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d4an01175a | DOI Listing |
Biosensors (Basel)
December 2024
School of Engineering, University of Guelph, Guelph, ON N1G 2W1, Canada.
Receptor-based biosensors often suffer from slow analyte diffusion, leading to extended assay times. Moreover, existing methods to enhance diffusion can be complex and costly. In response to this challenge, we presented a rapid and cost-effective technique for fabricating concave magnetic-responsive hydrogel discs (CMDs) by straightforward pipetting directly onto microscope glass slides.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
East Bavarian Centre for Intelligent Materials (EBACIM), Ostbayerische Technische Hochschule Regensburg, Seybothstr. 2, Regensburg, 93053, Germany.
Hypothesis: The presence of a wetting ridge is crucial for many wetting phenomena on soft substrates. Conventional experimental observations of a wetting ridge require permanent presence of a droplet. The magnetic field-induced plasticity effect (FIPE) of soft magnetoative elastomers (MAEs) allows one to overcome this limitation.
View Article and Find Full Text PDFMicrosyst Nanoeng
December 2024
College of Optical and Electronic Technology, China Jiliang University, Hangzhou, 310018, China.
Metasurface with natural static structure limits the development of dynamic metasurface holographic display with rapid response and broadband. Currently, liquid crystal (LC) was integrated onto the metasurface to convert the passive metasuface into an active one. But, majority of LC-assisted active metasurfaces often exhibit trade-offs among degree of freedom (DoF, typically less than 2), information capacity, response speed, and crosstalk.
View Article and Find Full Text PDFAdv Mater
December 2024
State Key Laboratory of Fluid Power & Mechatronic Systems, Zhejiang University, Hangzhou, 310058, China.
Magnetic liquid metal droplets, featured by unique fluidity, metallic conductivity, and magnetic reactivity, are of growing significance for next-generation flexible electronics. Conventional fabrication routes, which typically incorporate magnetic nanoparticles into liquid metals, otherwise encounter the pitfall pertaining to surface adhesivity and corrosivity over device modules. Here, an innovative approach of synergizing liquid metals with 2D magnetic materials is presented, accordingly creating chromium(III)-telluride-coated liquid metal (CT-LM) droplets via a simple self-assembly process.
View Article and Find Full Text PDFAdv Mater
December 2024
Centre for Advanced Structural Ceramics, Department of Materials, Imperial College London, London, SW7 2AZ, UK.
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactors to energy storage devices. Their microstructures dictate their properties from mass transport to fracture resistance. Consequently, there has been a multitude of processes developed to control them, from powder mixing and the use of short or long fibers, to tape casting for laminates up to recent 3D printing.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!