Influence of Opening Time Interval of Gate Signals on Suppression of Horizontally Polarized Signal of Infrared Pulsed Laser.

Since the beginning of the 21st century, infrared Nd:YVO pulsed lasers have been widely applied, especially in some actual industrial processes. In the working process of a laser-aided etching device, the "match-head" effect must be effectively controlled by suppressing the first giant pulse for a solid-state Q-switched laser. In the process of optimizing the infrared Nd:YVO pulsed laser by adjusting the slope parameters of the radio frequency (RF) modulation to suppress the first giant pulse, it has been found that an abnormal horizontally polarized emission with a very short time appears before the formal vertically polarized emission when the gate signal is artificially started. Actually, abnormal horizontally polarized emissions will bring some unexpected machining traces during the production process and even greater dangers. The experimental results show that with the increase in the slope duration of an RF signal, the existence time of abnormal output horizontally polarized light will be shortened, and the horizontal giant pulse and vertical giant pulse are well suppressed. When the slope duration is greater than 0.18 ms, both horizontal and vertical giant pulses will disappear. The horizontally polarized light can be thoroughly suppressed when the slope duration is greater than 13.7 ms. Compared with the method of adding a polarizer to eliminate abnormal output horizontally polarized light, this method does not add elements in the laser, ensuring that the laser volume is relatively small, and does not affect the quality of the normal output laser. The research conclusion is thought to be of great practical significance, especially for processing transparent materials.