High-Performance Field-Effect Sensing of Ammonia Based on High-Density and Ultrathin Silicon Nanowire Channels.

ACS Sens

School of Electronic Science and Engineering/National Laboratory of Solid-State Microstructures, Nanjing University, 210023 Nanjing, China.

Published: November 2024

AI Article Synopsis

  • Ultrathin silicon nanowires (SiNWs) are created using a cost-effective method, making them excellent components for sensitive field-effect transistor (FET) sensors.
  • A high-density array of ultrathin SiNWs, measuring 24 nm in diameter and spaced only 120 nm apart, is established through a novel fabrication technique.
  • The resulting FETs show impressive performance in detecting ammonia gas with a high sensitivity and rapid response, confirming their potential for advanced gas sensing applications in flexible and scalable technologies.

Article Abstract

Ultrathin silicon nanowires (SiNWs), grown via a high-yield and low-cost catalytic approach, are ideal building blocks for the construction of highly sensitive field-effect transistor (FET) sensors. In this work, we demonstrate a high-density growth integration of an ultrathin SiNW array, with diameter down to = 24 ± 3 nm and narrow NW-to-NW spacing of only 120 nm, fabricated via an in-plane solid-liquid-solid (IPSLS) approach. Junctionless bottom-gated SiNW FETs are successfully constructed, exhibiting a high on/off current ratio of >10 and a sharp subthreshold swing of 156 mV/dec These provide an excellent platform for realizing high-performance NH sensing at room temperature, with a high response of 96.9% at 25 ppm and 38.6% at 2.5 ppm, rapid response time of 7.9 s for 5% response (or 85.8 s for 50% response), and superior selectivity against common volatile organic compound gases in ambient environments. Finally, the field-effect sensing mechanism is attributed to the Schottky barrier modulation by the adsorbed NH molecules at the metal/SiNW interface, as confirmed through an epoxy-masked selective region comparative analysis. These results provide a solid basis for the ultrathin catalytic IPSLS-SiNWs to serve as advantageous one-dimensional (1D) channels for the scalable integration of various high-performance and flexible gas sensing applications.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acssensors.4c02426DOI Listing

Publication Analysis

Top Keywords

field-effect sensing
8
ultrathin silicon
8
high-performance field-effect
4
sensing
4
sensing ammonia
4
ammonia based
4
based high-density
4
ultrathin
4
high-density ultrathin
4
silicon nanowire
4

Similar Publications

Article Synopsis
  • Electrochemical sensing is essential for real-time monitoring of neurotransmitters and neuromodulators, helping to understand various physiological and psychological processes in the central nervous system.
  • Advanced biosensor technologies like voltammetry, amperometry, potentiometry, FET, and OECT are highlighted for their key roles in improving the detection capabilities from single cells to whole brains.
  • The review also discusses the strengths and weaknesses of these techniques while addressing current challenges and future directions for enhancing electrochemical biosensing methods.
View Article and Find Full Text PDF

In this work, the sensing ability and the underlying reaction pathways of HS adsorption on two nanomaterial systems, pristine zinc oxide (ZnO) nanowires (NWs) and gold functionalized zinc oxide nanowires (Au@ZnO NWs), were explored in a side-by-side comparison of optical and electrical gas sensing. The properties of optical sensing were analyzed by photoluminescence intensity-over-time measurements (-) of as-grown ZnO NW samples, and the electrical gas-sensing properties were analyzed by current-over-time measurements (-) of ZnO NW chemically sensitive field-effect transistor (ChemFET) structures with a gas-sensitive open gate. The ZnO NWs were grown by high-temperature chemical vapor deposition (CVD) and thereafter surface-functionalized with a thin Au nanoparticle layer by magnetron sputtering.

View Article and Find Full Text PDF

Tunable aptamer-MXene sensing interface for label-free and real-time detection of toxic pollutants in water samples.

Biosens Bioelectron

March 2025

Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian University of Technology, Dalian, 116024, China.

Stable and low-cost field-effect transistor (FET)-based biosensors are vital for the on-site detection of toxic pollutants in environmental monitoring applications. In this study, a tunable aptamer-MXene sensing interface was constructed to develop renewable FET biosensors. This was achieved through the reversible disulfide bond (-S-S-) reaction between the SH-TiCT film and thiolated aptamer.

View Article and Find Full Text PDF

In this paper, a new label-free DNA nanosensor based on a top-gated (TG) metal-ferroelectric-metal (MFM) graphene nanoribbon field-effect transistor (TG-MFM GNRFET) is proposed through a simulation approach. The DNA sensing principle is founded on the dielectric modulation concept. The computational method employed to evaluate the proposed nanobiosensor relies on the coupled solutions of a rigorous quantum simulation with the Landau-Khalatnikov equation, considering ballistic transport conditions.

View Article and Find Full Text PDF

Antibiotic residue detection by novel photoelectrochemical extended-gate field-effect transistor sensor.

J Hazard Mater

December 2024

College of Environmental Science and Engineering, Biomedical Multidisciplinary Innovation Research Institute, Shanghai East Hospital, State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, 1239 Siping Road, Shanghai 200092,  China; Shanghai Institute of Pollution Control and Ecological Security, Shanghai 200092, China. Electronic address:

Residual antibiotics in the environment may pose threats to both ecological system and public health, necessitating the development of efficient analytical strategy for monitoring and control. This study proposes a photoelectrochemical extended-gate field-effect transistor (PEGFET) sensor for specific and sensitive detection of kanamycin. The sensor utilizes ITO glass as the extended gate electrode (photoelectrode) and titanium dioxide as the photosensitive material.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!