Background: Predicting complete closure of large ventral hernias without component separation (CS) could have clinical value. The utility of multidetector computed tomography (MDCT)-based component separation index (CSI) was derived and evaluated for these hernias.

Methods: In 60 patients with a ventral hernia, a CSI was calculated based on their MDCT. In group I (first 30 patients), hernia repair was performed by an open approach and operative assessment determined the need for CS to effect complete closure. A CSI value above which defect closure needed CS was taken as the CSI reference point. In group II (second 30 patients), the hernia repair was done laparoscopically. Patients with a CSI at or below the reference point of group I underwent intraperitoneal onlay mesh (IPOM) after direct closure of the defect (IPOM-plus). The other patients had bilateral endoscopic component separation (ECS) before entry into the peritoneal cavity for an intended IPOM-plus.

Results: A CSI above 0.067 and 0.044 in open and laparoscopic approaches respectively required CS for complete defect closure. A CSI above 0.25 and 0.125 in open and laparoscopic approaches respectively, despite CS, predicted complete closure of defect was not possible.

Conclusion: CSI is a more comprehensive parameter for evaluation of ventral hernia than the conventional twodimensional parameters and can predict the need of component separation prior to complete closure of the defect in both laparoscopic and open approach.

Download full-text PDF

Source

Publication Analysis

Top Keywords

component separation
20
complete closure
16
closure defect
12
multidetector computed
8
large ventral
8
ventral hernias
8
csi
8
ventral hernia
8
patients hernia
8
hernia repair
8

Similar Publications

Since the establishment of the COVID-19 pandemic, a range of studies have been developed to understand the pathogenesis of SARS-CoV-2 infection, vaccine development, and therapeutic testing. However, the possible impacts that these viruses can have on non-target organisms have been explored little, and our knowledge of the consequences of the COVID-19 pandemic for biota is still very limited. Thus, the current study aimed to address this knowledge gap by evaluating the possible impacts of oral exposure of C57Bl/6 J female mice to SARS-CoV-2 lysate protein (at 20 µg/L) for 30 days, using multiple methods, including behavioral assessments, biochemical analyses, and histopathological examinations.

View Article and Find Full Text PDF

A theoretical comparison of different third component content in ternary organic solar cells.

Phys Chem Chem Phys

January 2025

School of Chemistry and Environmental Engineering, Changchun University of Science and Technology, Jilin Provincial Science and Technology Innovation Center of Optical Materials and Chemistry, Jilin Provincial International Joint Research Center of Photo-functional Materials and Chemistry, Changchun, 130022, China.

Ternary solar cells have been rapidly developed in the realm of organic solar cells (OSCs). The incorporation of a third component into a cell results in a complicated active layer morphology, and the relation of this morphology to power conversion efficiency remains elusive. In this work, two ternary active layers, B1:Y7 (10 wt%):BO-4Cl and B1:Y7 (50 wt%):BO-4Cl are constructed, and the reasons for the differences in PCE caused by varying the Y7 content are investigated using theoretical calculations.

View Article and Find Full Text PDF

The integration of metal-organic frameworks (MOFs) with functional materials has established a versatile platform for a wide range of energy storage applications. Due to their large specific surface area, high porosity, and tunable structural properties, MOFs hold significant promise as components in energy storage systems, including electrodes, electrolytes, and separators for alkali metal-ion batteries (AIBs). Although lithium-ion batteries (LIBs) are widely used, their commercial graphite anode materials are nearing their theoretical capacity limits, and the scarcity of lithium and cobalt resources increases costs.

View Article and Find Full Text PDF

Metal-organic frameworks for the separation of xylene isomers.

Chem Soc Rev

January 2025

Jiangsu Key Laboratory of Biofunctional Materials, Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, Jiangsu Key Laboratory of New Power Batteries, College of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023, China.

Xylene isomers, including -xylene (X), -xylene (X), -xylene (X), and ethyl benzene (EB), are important raw materials in industry. The separation of xylene isomers has been recognized as one of the "seven chemical separations to change the world". However, because of their similar physicochemical properties, totally separating four xylene isomers has remained a big challenge until now.

View Article and Find Full Text PDF

The light-absorbing chemical components of atmospheric organic aerosols are commonly referred to as Brown Carbon (BrC), reflecting the characteristic yellowish to brown appearance of aerosol. BrC is a highly complex mixture of organic compounds with diverse compositions and variable optical properties of its individual chromophores. BrC significantly influences the radiative budget of the climate and contributes to adverse air pollution effects such as reduced visibility and the presence of inhalable pollutants and irritants.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!