AI Article Synopsis
- Smart wearable devices need rechargeable batteries, which is a major drawback in the tech.
- Researchers are exploring flexible thermoelectric materials that can convert body heat into usable energy as a viable alternative.
- By using a special technique to add AgSnS to carbon fabric, they created a flexible thermoelectric material that shows significantly improved performance, with a maximum power factor of 110 μW/mK.
Article Abstract
Smart wearable devices are still powered by batteries requiring constant recharging, which is a key challenge faced in wearable technologies. Fabrication of flexible thermoelectric materials that can utilize body heat for wearable applications are an attractive alternative to batteries. Developing a thermoelectric material that is flexible, affordable, and has good performance remains a considerable challenge owing to the constrained thermoelectric efficiency of conducting polymers and the inherent rigidity of inorganic materials. Here, we have used a solvothermal technique to incorporate AgSnS into conductive carbon fabric as a flexible thermoelectric material. To further enhance its thermoelectric performance, various concentrations of AgSnS are grown on carbon fabric. The monoclinic phase of AgS on carbon fabric was verified by XRD analysis. After analyzing the thermoelectric characteristics of AgSnS, a maximum power factor of 110 μW/mK was observed for the SSS8 sample. This value is four times higher than the percentage of pristine AgS-CF. The W-TEG device fabricated using 3 pair modules produced an output voltage ranging from 0.09 to 1.5 mV across a temperature gradient of 3 to 8 K.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jcis.2024.10.082 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Radiative Warming Glass for High-Latitude Cold Regions.
Adv Sci (Weinh)
January 2025
Department of Electronic Engineering, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR, 999077, China.
Traditional window glazing, with inherently adverse energy-efficient optical properties, leads to colossal energy losses. Energy-saving glass requires a customized optical design for different climate zones. Compared with the widely researched radiative cooling technology which is preferable to be used in low-altitude hot regions; conversely in high-latitude cold regions, high solar transmittance (T) and low mid-infrared thermal emissivity (ε) are the key characteristics of high-performance radiative warming window glass, while the current low-emissivity (low-e) glass is far from ideal.
View Article and Find Full Text PDFHigh-performance ternary logic circuits and neural networks based on carbon nanotube source-gating transistors.
Sci Adv
January 2025
Key Laboratory for the Physics and Chemistry of Nanodevices and Center for Carbon-Based Electronics, School of Electronics, Peking University, Beijing 100871, China.
Multi-valued logics (MVLs) offer higher information density, reduced circuit and interconnect complexity, lower power dissipation, and faster speed over conventional binary logic system. Recent advancement in MVL research, particularly with emerging low-dimensional materials, suggests that breakthroughs may be imminent if multistates transistors can be fabricated controllably for large-scale integration. Here, a concept of source-gating transistors (SGTs) is developed and realized using carbon nanotubes (CNTs).
View Article and Find Full Text PDFTailoring the Porous Structure of Carbon for Enhanced Oxidative Cleavage and Esterification of C(CO)-C Bonds.
ChemSusChem
December 2024
National & Local Joint Engineering Research Center on Biomass Resource Utilization, College of Environmental Science and Engineering, Nankai University, Tianjin, 300350, P. R. China.
The cleavage and functionalization of carbon-carbon bonds are crucial for the reconstruction and upgrading of organic matrices, particularly in the valorization of biomass, plastics, and fossil resources. However, the inherent kinetic inertness and thermodynamic stability of C-C σ bonds make this process challenging. Herein, we fabricated a glucose-derived defect-rich hierarchical porous carbon as a heterogeneous catalyst for the oxidative cleavage and esterification of C(CO)-C bonds.
View Article and Find Full Text PDFSeparation of Highly Pure Semiconducting Single-Wall Carbon Nanotubes in Alkane Solvents via Double Liquid-Phase Extraction.
Nanomaterials (Basel)
December 2024
Department of Chemistry, University of Sherbrooke, 2500, Blvd de l'Université, Sherbrooke, QC J1K 2R1, Canada.
This study delves into the distinctive selective property exhibited by a non-conjugated cholesterol-based polymer, poly(CEM--EHA), in sorting semiconducting single-walled carbon nanotubes (s-SWCNTs) within isooctane. Comprised of 11 repeating units of cholesteryloxycarbonyl-2-hydroxy methacrylate (CEM) and 7 repeating units of 2-ethylhexyl acrylate (EHA), this non-conjugated polymer demonstrates robust supramolecular interactions across the sp surface structure of carbon nanotubes and graphene. When coupled with the Double Liquid-Phase Extraction (DLPE) technology, the polymer effectively segregates s-SWCNTs into the isooctane phase (nonpolar) while excluding metallic SWCNTs (m-SWCNTs) in the water phase (polar).
View Article and Find Full Text PDFElectrical Characteristics of Solution-Based Thin-Film Transistors with a Zinc-Tin Oxide/Carbon Nanotube Stacked Nanocomposite Active Layer.
Nanomaterials (Basel)
December 2024
Department of Semiconductor Engineering, Hoseo University, Asan 31499, Republic of Korea.
A stacked nanocomposite zinc-tin oxide/single-walled carbon nanotubes (ZTO/SWNTs) active layer was fabricated for thin-film transistors (TFTs) as an alternative to the conventional single-layer structure of mixed ZTO and SWNTs. The stacked nanocomposite of the solution-processed TFTs was prepared using UV/O treatment and multiple annealing steps for each layer. The electrical properties of the stacked device were superior to those of the single-layer TFT.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!