In this Letter, the silicon-based microring resonator (MRR) was experimentally demonstrated for cryogenic sensing down to 10 K by overcoming the issue of acquiring the optical signals at low temperatures for on-chip optical sensors. A wide-range temperature sensor from 240 to 10 K was obtained. The experimental results show that the device sensitivity decreased from 64.7 pm/K at 240 K to 4.19 pm/K at 10 K. Theoretical analysis indicates that the reduction in sensitivity is attributed to the weakening of thermo-optic effects with the decrease in temperature, which is well consistent with the experimental results. Based on this work, the silicon-based ring resonators, featuring complementary metal oxide semiconductor (CMOS) compatibility, high-quality factors, and ease of chip-scale integration, are a potential platform for ultra-low temperature monitoring.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OL.533213DOI Listing

Publication Analysis

Top Keywords

ultra-low temperature
8
wide-range ultra-low
4
temperature
4
temperature thermometer
4
thermometer based
4
based silicon
4
silicon resonator
4
resonator letter
4
letter silicon-based
4
silicon-based microring
4

Similar Publications

Tire pressure monitoring systems (TPMSs) are essential for maintaining driving safety by continuously monitoring critical tire parameters, such as pressure and temperature, in real time during vehicle operation. Among these parameters, tire pressure is the most significant, necessitating the use of highly precise, cost-effective, and energy-efficient sensing technologies. With the rapid advancements in micro-electro-mechanical system (MEMS) technology, modern automotive sensing and monitoring systems increasingly rely on MEMS sensors due to their compact size, low cost, and low power consumption.

View Article and Find Full Text PDF

A Miniaturized and Ultra-Low-Power Wireless Multi-Parameter Monitoring System with Self-Powered Ability for Aircraft Smart Skin.

Sensors (Basel)

December 2024

Research Center of Structural Health Monitoring and Prognosis, State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.

The aircraft smart skin (ASS) with structural health monitoring capabilities is a promising technology. It enables the real-time acquisition of the aircraft's structural health status and service environment, thereby improving the performance of the aircraft and ensuring the safety of its operation, which in turn reduces maintenance costs. In this paper, a miniaturized and ultra-low-power wireless multi-parameter monitoring system (WMPMS) for ASS is developed, which is capable of monitoring multiple parameters of an aircraft, including random impact events, vibration, temperature, humidity, and air pressure.

View Article and Find Full Text PDF

High-Performance Thermoelectric Composite of BiTe Nanosheets and Carbon Aerogel for Harvesting of Environmental Electromagnetic Energy.

ACS Nano

January 2025

State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P. R. China.

Intensifying the severity of electromagnetic (EM) pollution in the environment represents a significant threat to human health and results in considerable energy wastage. Here, we provide a strategy for electricity generation from heat generated by electromagnetic wave radiation captured from the surrounding environment that can reduce the level of electromagnetic pollution while alleviating the energy crisis. We prepared a porous, elastomeric, and lightweight BiTe/carbon aerogel (CN@BiTe) by a simple strategy of induced in situ growth of BiTe nanosheets with three-dimensional (3D) carbon structure, realizing the coupling of electromagnetic wave absorption (EMA) and thermoelectric (TE) properties.

View Article and Find Full Text PDF

Chemical nanosensors based on nanoparticles of tin dioxide and graphene-decorated tin dioxide were developed and characterized to detect low NO concentrations. Sensitive layers were prepared by the drop casting method. SEM/EDX analyses have been used to investigate the surface morphology and the elemental composition of the sensors.

View Article and Find Full Text PDF

Tailoring crystal facets of metal-organic frameworks to enhance sensing performance for aromatic vapors detection.

J Hazard Mater

December 2024

NEST Lab., Department of Chemistry, College of Science, Shanghai University, 99 Shangda Road, Shanghai 200444, China. Electronic address:

It is well known that metals and metal oxides with different crystal facets exhibit varying sensitivity in gas sensors, but this strategy is rarely used in metal-organic frameworks (MOFs). Herein, we proved for the first time that Cu metal-organic with high energy crystal facets (Cu-MOF-74-300) shows a much higher sensitivity than the low energy crystal facets (Cu-MOF-74-110), with a up to 2 times response more than Cu-MOF-74-110 and ultra-low limit of detection (LOD) of 68 ppb to toluene vapors. In addition, this strategy was further demonstrated on MOF-14 and HKUST-1, which are also Cu-centered and exhibit clear recognition effects on benzene and xylene, respectively.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!