In the production and construction process of a slowly inclined composite coal seam surface mine in China, the problem of coal compression by the non-working slope is common, but the research on coal recovery is usually conducted for the end slope compression problem. Due to the small economic and reasonable stripping ratio in the early stage of infrastructure construction in an open-pit mine, the buried deep coal seam has not yet been mined and is covered by internal dumping. In recent years, with the gradual increase of the economic and reasonable stripping ratio, the mining of coal seam covered by internal dumping site has become feasible. This paper puts forward the mining scheme for this problem. In this paper, a mathematical model is established, and the trench between the inner dump and the non-working side is used as the working platform for coal seam mining. The relationship between stripping height, working line length and mining width of coal seam is studied. The variation law of production stripping ratio, remining amount, repeated stripping amount and mining width is further analyzed. At the same time, the influence of production stripping cost on the economic and reasonable stripping ratio is studied, and the relationship between transportation cost and discharge distance is established, so as to indirectly determine the relationship between mining width and economic and reasonable stripping ratio. Finally, it is found that the relationship between mining net income and mining width is first proportional and then inversely proportional. Taking an open-pit mine as an example, through the quantitative analysis of economic indicators, the net income of coal mining under different mining widths is calculated. The results show that when the mining width is 271 m, the economic benefit of the inner row mining is the highest, and the net income reaches 2021.4575 million yuan. At this time, the production stripping ratio is 5.25, which is less than the economic and reasonable stripping ratio of 6.95. The practical significance of the results is to improve the overall economic benefits and recovery rate of mining enterprises, and ensure the safe, green and efficient mining of mines.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11522402PMC
http://dx.doi.org/10.1038/s41598-024-76960-3DOI Listing

Publication Analysis

Top Keywords

stripping ratio
28
coal seam
24
economic reasonable
20
reasonable stripping
20
mining width
20
mining
14
open-pit mine
12
production stripping
12
net income
12
stripping
10

Similar Publications

Manipulating Interphase Chemistry for Aqueous Zn Stabilization: The Role of Supersaturation.

Angew Chem Int Ed Engl

December 2024

Guangdong University of Technology, school of chemical engineering and light industry, Panyu, Guangzhou University City Outer Ring Road No. 100, 510006, Gaungzhou, CHINA.

The limited cycling durability of Zn anode, attributed to the absence of a robust electrolyte-derived solid electrolyte interphase (SEI), remains the bottleneck for the practical deployment of aqueous zinc batteries. Herein, we highlight the role of local supersaturation in governing the fundamental crystallization chemistry of Zn4SO4(OH)6·xH2O (ZSH) and propose a subtle supersaturation-controlled morphology strategy to tailor the interphase chemistry of Zn anode. By judiciously creating local high-supersaturation environment with organic caprolactam to manipulate the precipitation manner of zinc sulfate hydroxide (ZSH), lattice-lattice matched heterogeneous nucleation of ZSH (001) and Zn (002) is realized in aqueous ZnSO4, producing a dense, pseudo-coincidence interface capable of functioning as decent SEI.

View Article and Find Full Text PDF

Background: Due to the specific anatomical features of the tibia (limited soft tissue coverage), more than a quarter of its fractures are classified as open, representing the most common open long-bone injuries. Open tibial fractures frequently cause significant bone comminution, periosteal stripping, soft tissue loss, contamination and are prone to bacterial entry with biofilm formation, which increases the risk of deep bone infection. The main objective of this study was to determine prevalence of infection and its associated factors in surgically treated open tibial fracture, at Addis Ababa Burn Emergency and Trauma (AaBET) hospital.

View Article and Find Full Text PDF

A new class of ligands, ,'-dialkyl-2,6-pyridinediamide (DRPDA), has been designed with the specific intention of exhibiting interchangeable diversity in coordination modes, including organometallic interactions, for the purpose of solvent extraction of elements relevant to the proper treatment of high-level radioactive liquid waste (HLLW) generated after nuclear fuel reprocessing. Consequently, DRPDA has been observed to extract Pd(II) and Zr(IV) from HNO(aq) to 1-octanol in nearly quantitative yields when the selected ligand is sufficiently hydrophobic. However, concomitance of some of other HLLW components were also found.

View Article and Find Full Text PDF

Accurate in situ carbon isotopic measurements of magnesium-rich carbonates using LA-MC-ICP-MS require effective correction for isobaric interference, particularly from doubly charged Mg ions that can induce δC deviations of several permil. This study focuses on optimizing gas parameters and developing robust correction strategies to improve the accuracy of δC measurements. Experimental results demonstrate that the introduction of nitrogen gas at a flow rate of 4-6 mL/min effectively doubles signal sensitivity while optimizing low helium (0.

View Article and Find Full Text PDF

The effect of Bi-to-metal ion concentration ratio ( / ratio) on key evaluation indicators, including sensitivity, precision, and cathodic potential range, has been investigated for the determination of Cd and Pb at prepared bismuth film electrodes. Unlike the usual recommendation of at least a 10-fold excess of Hg(ii) for anodic stripping experiments at prepared mercury film electrodes, it is found that the / ratios in the 1-10 range are sufficient to obtain a high determination sensitivity, but that the signal decreases significantly when the ratio exceeds 40. Further analysis shows that the precision of the analytical results is good when the / ratio is in the range of 5-10.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!