Two-Dimensional MXene Flakes with Large Second Harmonic Generation and Unique Surface Responses.

MXenes are a family of two-dimensional (2D) materials with broad and varied applications in biology, materials science, photonics, and environmental remediation owing to their layered structure and high surface area-to-volume ratio. MXenes have exhibited significant nonlinear optical characteristics, which have been primarily explored in the context of photonics applications, yet the second-harmonic generation (SHG) behavior of MXenes remains an unexplored aspect of their optical properties. Herein, we demonstrate and quantify large second-order responses of 2D TiCT MXenes both in aqueous solutions and on a silicon substrate for the first time. MXene flakes showed strong second-harmonic scattering (SHS) in a dilute suspension with a sensitivity of less than 0.1 μg/mL. Angle-dependent SHS experiments further found that the second-order responses originate from coherent 2D dipole radiation. Through confocal and atomic force microscopies, we found that the intense SHG signal from free-standing MXene flakes increases exponentially with decreasing thickness, while two-photon fluorescence increases linearly with thickness. The second-order susceptibility of the MXenes was determined to be 3.6 pm V with a thickness of 10 nm, almost twice of that for an often-used SHG crystal, beta barium borate. We further explored surface properties of the MXene sheets by investigating the SHS responses upon addition of organic dye molecules to the system. It was found that the adsorption of crystal violet (CV) obeys a Langmuir adsorption model while the addition of malachite green (MG) resulted in almost no change in SHG intensity, even though the adsorption capacities for both CV (61.3 ± 1.7 mg/g) and MG (54.8 ± 2.8 mg/g) are similar. Such a stark difference in adsorption characteristics between cationic organic CV and MG dyes is likely due to their distinct orientational orderings on the MXene surfaces. This work opens many possibilities for the further employment of the family of 2D materials in photonics, optics, and surface catalysis applications.