Stent migration is one of the common complications after tracheal stent implantation. The causes of stent migration include size mismatch between the stent and the trachea, physiological movement of the trachea, and so on. In order to solve the above problems, this study designed a non-uniform Poisson ratio tracheal stent by combining the size and structure of the trachea and the physiological movement of the trachea to improve the migration of the stent, meanwhile ensuring the support of the stent. In this study, the stent corresponding to cartilage was constructed with negative Poisson's ratio, and the stent corresponding to the circular connective tissue and muscular membrane was constructed with positive Poisson's ratio. And four kinds of non-uniform Poisson's ratio tracheal stents with different link lengths and negative Poisson's ratio were designed. Then, this paper numerically simulated the expansion and rebound process of the stent after implantation to observe the support of the stent, and further simulated the stretch movement of the trachea to calculate the diameter changes of the stent corresponding to different negative Poisson's ratio structures. The axial migration of the stent was recorded by applying different respiratory pressure to the wall of the tracheal wall to evaluate whether the stent has anti-migration effect. The research results show that the non-uniform Poisson ratio stent with connecting rod length of 3 mm has the largest diameter expansion in the negative Poisson ratio section when the trachea was stretched. Compared with the positive Poisson's ratio structure, the axial migration during vigorous breathing was reduced from 0.024 mm to 0.012 mm. The negative Poisson's ratio structure of the non-uniform Poisson's ratio stent designed in this study did not fail in the tracheal expansion effect. Compared with the traditional stent, the non-uniform Poisson's ratio tracheal stent has an anti-migration effect under the normal movement of the trachea while ensuring the support force of the stent.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11527757 | PMC |
http://dx.doi.org/10.7507/1001-5515.202402014 | DOI Listing |
Sci Adv
December 2024
Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.
Real-time monitoring of infinitesimal deformations on complex morphologies is essential for precision biomechanical engineering. While flexible strain sensors facilitate real-time monitoring with shape-adaptive properties, their sensitivity is generally lower than spectroscopic imaging methods. Crack-based strain sensors achieve enhanced sensitivity with gauge factors (GFs) exceeding 30,000; however, such GFs are only attainable at large strains exceeding several percent and decline below 10 for strains under 10, rendering them inadequate for minute deformations.
View Article and Find Full Text PDFACS Sens
December 2024
School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, P. R. China.
The pursuit of efficient and accurate human-computer interface design urgently requires high-performance sensors with pressure sensitivity, a wide detection range, and excellent cycling stability. Herein, a biomimetic honeycomb-like TiCT MXene/bacterial cellulose (BC) aerogel with a negative Poisson's ratio (ν = -0.14) synthesized from the bidirectional freeze-drying method is used as the active material for a flexible pressure sensor, which exhibits high sensitivity (20.
View Article and Find Full Text PDFMaterials (Basel)
November 2024
Department of Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave, Tehran 15916-34311, Iran.
Cellular biomaterials offer unique properties for diverse biomedical applications. However, their complex viscoelastic behavior requires careful consideration for design optimization. This study explores the effective viscoelastic response of two promising unit cell designs (tetrahedron-based and octet-truss) suitable for high porosity and strong mechanics.
View Article and Find Full Text PDFMaterials (Basel)
November 2024
Faculty of Mechanical Engineering, Department of Applied Mechanics and Biomechanics, Tadeusz Kosciuszko Cracow University of Technology, al. Jana Pawła II 37, 31-864 Cracow, Poland.
In the development of restorative materials, it is important to evaluate the elastic properties of the material in order to achieve good clinical results. The aim of this study was to evaluate the compression behavior of two dental flowable materials (EverX Flow and Flow-Art) using experimental methods and numerical simulation. The Poisson's ratio was determined using two methods of strain measurement: the electrical strain gauge method (ESG) and digital image correlation (DIC).
View Article and Find Full Text PDFMaterials (Basel)
November 2024
Faculty of Civil Engineering Subotica, Univerisity of Novi Sad, Kozaračka 2a, 24000 Subotica, Serbia.
A theoretical model for porous viscoelastoplastic (VEP) materials in the dry state is investigated in this research study. The model is based on the principles of conservation of mass and energy using the rheological dynamic theory (RDT). The model provides expressions for the creep coefficient, Poisson's ratio, modulus of elasticity, damage variable, and strength as a function of porosity and/or void volume fraction (VVF).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!