Design and damping characterization of sandwich composite made of particle-filled hollow spheres and steel sheets.

Sandwich composites made of particle-filled hollow sphere structures (PHSS) and steel sheets offer excellent lightweight and damping properties, ideal for high-speed machine tool components under dynamic loads. Previous research has focused on single particle-filled hollow sphere (PHS) and small PHSS, leaving a gap understanding of PHSS/steel sandwich composites. In this study a test rig was developed, and Design of Experiments and Response Surface Analysis were used to investigate the effects of sheet and core thickness (design parameters), filling ratio, and particle size (particle parameters) on the damping performance of PHSS/steel sandwiches. The results indicate that the design parameters have a significant influence on damping performance. The interaction between design and particle parameters also substantially affects damping. Minimizing particle size, increasing filling ratio, thinning the face layer, and thickening the core layer significantly improve structural damping. To address manufacturing tolerances, a finite element (FE) model-based optimization was developed to accurately determine PHSS material parameters. These parameters were used in an FE model of the PHSS-steel composite, with identified contact parameters minimizing measurement and simulation differences. The homogenized material model and the linear model using global damping parameters accurately reproduce the dynamic properties of the PHSS-steel sandwich composite in low vibration modes.