Transformation of iron-minerals from natural aquifer media by sulfate-reducing bacteria: Behavior, mechanism, and Cr(VI) removal.

Sci Total Environ

Key Laboratory of Groundwater Resources and Environment of Ministry of Education, College of New Energy and Environment, Jilin University, Changchun 130021, China; National and Local Joint Engineering Laboratory for Petrochemical Contaminated Site Control and Remediation Technology, Jilin University, Changchun 130021, China; Jilin Provincial Key Laboratory of Water Resources and Environment, College of New Energy and Environment, Jilin University, Changchun 130021, China. Electronic address:

Published: December 2024

Sulfate-reducing bacteria (SRB) and iron minerals are widespread in subsurface environments, where their mediated Fe and S transformations are crucial for contaminant immobilization. However, the mechanism mediated by SRB to transform natural iron minerals into reduced iron-sulfur compounds and the contaminant removal capacity of the transformation products remain unclear. Herein, the mechanism of native SRB-mediated transformation of iron-minerals from natural aquifer media into biogenic ferrous sulfide (FeS) was revealed and the Cr(VI) removal performance of the transformation product was evaluated. The results showed that Fe production, sulfate reduction, and sulfide production occurred sequentially (rather than simultaneously) in the liquid phase. This suggests new processes and mechanisms for iron-mineral transformation: first, iron minerals dissolve to produce Fe under enzymatic action rather than sulfide reduction; then, the generated Fe accelerates sulfate reduction by SRB, producing sulfide in large amounts; finally, sulfide combines rapidly with Fe to produce FeS. Elevated temperatures markedly shortened the required transformation time to start: maximum Fe production occurred at 18-24 days, 6-12 days, and 0-6 days at 10 °C, 20 °C, and 35 °C, respectively. Ambient temperature strongly affected SRB community composition, with Desulfosporosinus dominant at 10 °C and 20 °C and Desulfotomaculales prevalent at 35 °C. Sequential extraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analyses confirmed FeS as the main transformation product, which exhibited a highly efficient Cr(VI) removal capacity. Extending transformation time or increasing transformation temperature enhanced the Cr(VI) removal capacity of the transformation product. In column experiments, in-situ stimulation of SRB growth in aquifer media is able to form FeS, the Cr(VI) removal capacity of FeS reached up to 90.1 mg(Cr(VI))/kg(media). These findings suggest that biostimulation of SRB to mediate the in-situ transformation of iron-minerals to FeS has great potential for remediation of contaminated groundwater.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2024.177021DOI Listing

Publication Analysis

Top Keywords

crvi removal
20
removal capacity
16
transformation iron-minerals
12
aquifer media
12
iron minerals
12
transformation product
12
transformation
11
iron-minerals natural
8
natural aquifer
8
sulfate-reducing bacteria
8

Similar Publications

The reuse of electro-coagulated sludge as an adsorbent for Cr(VI) ion reduction was investigated in this study. Electro-coagulated sludge was obtained during the removal of citric acid wastewater by the electrocoagulation process. The following parameters were optimized for Cr(VI) reduction: pH (5-7), initial Cr(VI) concentration (10-50 mg/L), contact time (10-45 min), and adsorbent dosage (0.

View Article and Find Full Text PDF

To tackle the challenges of increasing the efficiency of photocatalysts, a ternary magnetic heterojunction photocatalyst containing spinel cobalt and zinc ferrites, and zeolite (CZZ) was designed and fabricated. The physicochemical properties of the novel photocatalyst were verified using characterization techniques such as XRD, FT-IR, FE-SEM, EDS mapping, N adsorption-desorption, VSM, PL, and UV-Vis DRS. The CZZ photocatalyst exhibited a significant Cr (VI) reduction rate of 0.

View Article and Find Full Text PDF

Amino-functionalized manganese oxide for effective hexavalent chromium adsorption.

Environ Sci Pollut Res Int

December 2024

Laboratory of Interface Materials Environment, Faculty of Sciences Ain Chock, Hassan II University, Casablanca, Morocco.

This study explores the use of functionalized manganese oxide (K-MnO-NH) for the removal of hexavalent chromium (Cr(VI)) ions, a highly toxic heavy metal contaminant, from wastewater. The synthesis of K-MnO-NH was achieved through a two-step process, followed by comprehensive characterization using various analytical techniques, which confirmed the material's formation as a pure phase. The K-MnO-NH exhibited exceptional chromium removal efficiency, achieving up to 90% (4.

View Article and Find Full Text PDF

The structure and active components of the filling material play a critical role in the contamination remediation performance of permeable reactive barriers. However, current methods lack a comprehensive understanding of the structural evolution and long-term performance of these materials during remediation processes. This study utilizes column experiments combined with spectral induced polarization (SIP) monitoring to investigate the effectiveness of zero-valent iron (ZVI), activated carbon (AC), and their composite with sand in removing Cr(VI).

View Article and Find Full Text PDF

Adsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.

Gels

November 2024

Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.

The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!