Surface passivation with 2D perovskites has been reported to be important for high-performance perovskite solar cells (PSCs). However, it is challenging to achieve a controlled growth of 2D perovskites, which typically feature random orientation and various n number. In this paper, we fabricate a 2D layer with a highly ordered orientation and pure = 1 phase on top of the perovskite film using the organic spacer molecule 7-fluoro-1,2,3,4-tetrahydroisoquinolinehydrochloride (7-FTH). The formed 2D perovskites feature a highly ordered orientation normal to the substrate and a pure = 1 phase, which efficiently passivates surface defects of the as-prepared perovskite films and improves the energy level alignment between the perovskite film and electron transport layer. Consequently, the modified PSCs achieve a champion power conversion efficiency (PCE) of 24.65% with improved and fill factor. After being stored in an N glovebox for 1200 h and kept in ambient air (room temperature and relative humidity of 50-70%) for 840 h, the modified devices retain 93% and 95% of its initial PCE, respectively.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.4c14866 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimization & enhancement of KGeCl-based perovskite solar cells through charge transport layer engineering.
RSC Adv
January 2025
Department of Electrical Engineering, Sarhad University of Information Technology Peshawar 25000 Pakistan.
The growing demand for efficient, stable, and environmentally friendly photovoltaic technologies has motivated the exploration of nontoxic perovskite materials such as KGeCl. However, the performance of KGeCl-based perovskite solar cells (PSCs) depends heavily on the compatibility of charge transport layers (CTLs) and optimization of device parameters. In this study, six PSC configurations were simulated using SCAPS-1D software, incorporating CTLs such as Alq, CSTO, VO, PB, and SbS.
View Article and Find Full Text PDFDimensional Regulation of Organic n-Type Dopants for Highly Efficient Perovskite Solar Cells and Modules.
Adv Mater
January 2025
College of Chemistry, Nanchang University, Nanchang, 330031, China.
A strong n-type perovskite layer is crucial in achieving high open-circuit voltage (V) and power conversion efficiency (PCE) in the p-i-n solar cells, as the weak n-type perovskites result in a loss of V, and the p-type perovskites contain numerous electron traps that cause the severe carrier recombination. Here, three types of perylene diimide (PDI) based small molecule dopants with different dimensions, including 1D-PDI, 2D-PDI, and 3D-PDI are designed, to produce heavier n-type perovskites. The PDI-based molecules with Selenium atoms have a strong electron-donating ability, effectively enlarging the quasi-Fermi level splitting within the perovskites.
View Article and Find Full Text PDFSolvent-Mediated Growth of a Hierarchical Zero-Dimensional Architecture for Efficient CsPbI Quantum Dot Solar Cells.
Small
January 2025
School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei, 230009, China.
Perovskite quantum dots (QDs) are promising optoelectronic materials. The large surface area provides an opportunity for ligand engineering to protect the QDs, while also impeding the charge transport in the QD array. Here, the solvent-mediated growth of a hierarchical zero-dimensional (HZD) architecture between CsPbI QDs is reported.
View Article and Find Full Text PDFInterfacial Work Function Modulation of Wide Bandgap Perovskite Solar Cell for Efficient Perovskite/CIGS Tandem Solar Cell.
Small Methods
January 2025
Center for Photonics Information and Energy Materials, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong, 518055, P. R. China.
Wide-bandgap perovskite solar cells (PVSCs), a promising top-cell candidate for high-performance tandem solar cells, often suffer from larger open-circuit voltage (V) deficits as the bandgap increases. Surface passivation is a common strategy to mitigate these V deficits. However, understanding the mechanisms underlying the differences in passivation effects among various types of molecules remains limited, which is crucial for developing universal interface passivation strategies and guiding the design of passivation molecules.
View Article and Find Full Text PDFEnhanced Efficiency and Stability of Tin Halide Perovskite Solar Cells Through MOF Integration.
Small
January 2025
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, 464-8603, Japan.
Tin halide perovskites are promising candidates for lead-free perovskite solar cells due to their ideal bandgap and high charge-carrier mobility. However, poor crystal quality and rapid degradation in ambient conditions severely limit their stability and practical applications. This study demonstrates that incorporating UiO-66, a zirconium-based MOF, significantly enhances the performance and stability of tin halide perovskite solar cells (TPSCs).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!