AI Article Synopsis
Article Abstract
Among Additive Manufacturing (AM) technologies, Laser Powder Bed Fusion (LPBF) has made a great contribution to optimizing the production of customized implant materials. However, the design of the ideal surface topography, capable of exerting the best biological effect without drawbacks, is still a subject of study. The aim of the present study is to topographically and biologically characterize AM-produced Ti6Al4V ELI (Extra Low Interstitial) samples by comparing different surface finishing. Vertically and horizontally samples are realized by LPBF with four surface finishing conditions (as-built, corundum-sandblasted, zirconia-sandblasted, femtosecond laser textured). Bioactivity in vitro tests are performed with human osteoblasts evaluating morphology, metabolic activity, and differentiation capabilities in direct contact with surfaces. Scanning electron microscope and profilometry analysis are used to evaluate surface morphology and samples' roughness with and without cells. All tested surfaces show good biocompatibility. The influence of material surface features is evident in the early evaluation, with the most promising results of morphological study for laser texturing. Deposition orientations seem to influence metabolic activities, with XZ orientation more effective than XY. Current data provide the first positive feedback on the biocompatibility of laser texturing finishing, still poorly described in the literature, and support the future clinical development of devices produced with a combination of LPBF and different finishing treatments.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adhm.202402873 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electrodeposited hydroxyapatite coating on titanium after ultrashort-pulsed laser processing for a novel surface of endosseous implants.
Dent Med Probl
December 2024
Department of Prosthetic Dentistry and Gerodontology, Poznan University of Medical Sciences, Poland.
Background: Ceramic endosseous implant coatings have gained esteem due to their favorable osteoinductive and osteoconductive properties. However, such a layer may be prone to failure under in vivo conditions, which necessitates its modification.
Objectives: The aim of the present study was to modify an electrodeposited hydroxyapatite (HA) coating on titanium (Ti) with ultrashort-pulsed lasers for the incorporation of the ceramic into the sample surface and the texturing of the metal surface.
Development, Verification and Assessment of a Laser Profilometer and Analysis Algorithm for Microtexture Assessment of Runway Surfaces.
Sensors (Basel)
November 2024
School of Science, Technology and Engineering, University of Sunshine Coast, Sippy Downs, QLD 4556, Australia.
Runway surface friction is critically important to safe aircraft operations and mostly depends on the surface texture, which provides grip in the presence of contamination and directly affects the friction coefficient in general. Microtexture assessment is the most challenging part of texture assessment since there is no standardised pavement microtexture control method in runway maintenance and management practice. The purpose of this study was to develop a simple laser profilometer and analysis model and subsequent validation for use in runway friction surveys.
View Article and Find Full Text PDFInfluence of Laser Micro-Texturing and Plasma Treatment on Adhesive Bonding Properties of WC-Co Carbides with Steel.
Materials (Basel)
December 2024
Department of Metal Forming, Welding and Metrology, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland.
This article presents research on advanced surface preparation methods for sintered carbides (WC-Co, grade B2) commonly used in the tool industry, particularly in the context of bonding these materials with C45 steel using adhesives. Sintered carbides are widely used due to their high hardness, wear resistance, and good ductility, making them ideal for manufacturing tools operating in harsh conditions. Traditional bonding methods, such as brazing and welding, often result in stresses and cracks.
View Article and Find Full Text PDFThree-Dimensional Non-Homogeneous Microstructure Representation Using 2D Electron Backscatter Diffraction Data for Additive-Manufactured Hastelloy X.
Materials (Basel)
December 2024
Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden.
Additive manufacturing (AM) methods like powder bed fusion-laser beam (PBF-LB) enable complex geometry production. However, understanding and predicting the microstructural properties of AM parts remain challenging due to the inherent non-homogeneity introduced during the manufacturing process. This study demonstrates a novel approach for 3D microstructure representation and virtual testing of non-homogeneous AM materials using 2d electron backscatter diffraction (EBSD) data.
View Article and Find Full Text PDFEffect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel.
Materials (Basel)
November 2024
Faculty of Mechanical Engineering, Poznań University of Technology, Piotrowo 3, 61-138 Poznań, Poland.
This study investigates how laser-induced surface modifications influence key properties such as wear resistance, hardness, and friction in dry and lubricated conditions. The research applies nanosecond pulsed laser treatment to create random, quasi-random, quasi-periodic, and periodic surface structures on the steel surface, aiming to enhance the wear resistance and reduce the coefficient of friction (COF). The frictional performance between the carbon steel ball and the texturized surface was evaluated, including an analysis of the initial friction phase contact (single, double, and multi-contact), with the surface topography assessed before and after wear.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!