The objective of this work was to study the properties of new vitreous samples of pure BAlMgLi and Ce-doped BAlMgLi produced by the melt-quenching method. The structural and vibrational characteristics of the samples were analyzed using x-ray diffraction (XRD), vibrational Raman spectroscopy, and vibrational Fourier transform infrared spectroscopy (FTIR). Optically stimulated luminescence (OSL) and thermoluminescence (TL) techniques were also used to identify whether the samples showed a response to ionizing radiation. XRD analyses confirmed the predominance of the amorphous phase of the samples. The Raman spectra revealed that the atomic bonds present in the material matrix are of the pyroborate and metaborate type, enabling stretching vibrations in isolated BO and/or Al-O or Al-O-B units. The band at approximately 810 cm is characteristic of the formation of the boroxol ring, indicating that the presence of other elements in the matrix does not affect its glassy characteristics. The FTIR analyses reinforce the results found by Raman spectroscopy, because bands characteristic of low hygroscopic glasses were observed, due to the conversion of BO units into BO in triborate, tetraborate, and pentaborate groups. This conversion is due to dopant entrainment, which contributes to the high optical transparency of the samples. Their OSL and TL signals were reproducible with intensities dependent on the dopant concentration and radiation dose, with the most intense emissions resulting from 0.5% Ce concentrations.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.apradiso.2024.111548 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A lightweight and precision dual track 1D and 2D feature fusion convolutional network for machinery equipment fault diagnosis.
Sci Rep
December 2024
College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou, 325035, China.
Addressing the issues of a single-feature input channel structure, scarcity of training fault data, and insufficient feature learning capabilities in noisy environments for intelligent diagnostic models of mechanical equipment, we propose a method based on a one-dimensional and two-dimensional dual-channel feature information fusion convolutional neural network (1D_2DIFCNN). By constructing a one-dimensional and two-dimensiona dual-channel feature information fusion convolutional network and introducing a Convolutional Block Attention Mechanism, we utilize Random Overlapping Sampling Technique to process raw vibration signals. The model takes as inputs both one-dimensional data and two-dimensional Continuous Wavelet Transform images.
View Article and Find Full Text PDFAll-polymer piezo-ionic-electric electronics.
Nat Commun
December 2024
Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, 610031, China.
Piezoelectric electronics possess great potential in flexible sensing and energy harvesting applications. However, they suffer from low electromechanical performance in all-organic piezoelectric systems due to the disordered and weakly-polarized interfaces. Here, we demonstrated an all-polymer piezo-ionic-electric electronics with PVDF/Nafion/PVDF (polyvinylidene difluoride) sandwich structure and regularized ion-electron interfaces.
View Article and Find Full Text PDFPhononic modulation of spin-lattice relaxation in molecular qubit frameworks.
Nat Commun
December 2024
Department of Chemistry, School of Science and Research Center for Industries of the Future, Westlake University, Hangzhou, Zhejiang Province, China.
The solid-state integration of molecular electron spin qubits could promote the advancement of molecular quantum information science. With highly ordered structures and rational designability, microporous framework materials offer ideal matrices to host qubits. They exhibit tunable phonon dispersion relations and spin distributions, enabling optimization of essential qubit properties including the spin-lattice relaxation time (T) and decoherence time.
View Article and Find Full Text PDFCollected data on bending, vibration, and push-out tests of shallow steel-timber composite beams-Nordic system.
Data Brief
December 2024
Tampere University, Faculty of Built Environment, P.O. Box 600, FI-33014 Tampere, Finland.
In a slim-floor structural system, beams and slabs are placed at the same level, reducing the overall floor height and material usage in vertical structures, thereby improving economic efficiency. The use of slim-floor structures is common practice in Finnish construction where these structures are typically constructed using hollow-concrete slabs and welded steel box beams. However, in Finland, only a few buildings utilise cross-laminated timber (CLT) slabs in slim-floor structures, and none have incorporated the composite action between CLT and steel beams.
View Article and Find Full Text PDFHydrogen Bond Blueshifts in Nitrile Vibrational Spectra Are Dictated by Hydrogen Bond Geometry and Dynamics.
JACS Au
December 2024
Freie Universität Berlin, Physics Department, Experimental Molecular Biophysics, Arnimallee 14, 14195 Berlin, Germany.
Vibrational Stark effect (VSE) spectroscopy has become one of the most important experimental approaches to determine the strength of noncovalent, electrostatic interactions in chemistry and biology and to quantify their influence on structure and reactivity. Nitriles (C≡N) have been widely used as VSE probes, but their application has been complicated by an anomalous hydrogen bond (HB) blueshift which is not encompassed within the VSE framework. We present an empirical model describing the anomalous HB blueshift in terms of H-bonding geometry, i.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!