Background: Floating photovoltaics (FPV) is an emerging technology that is gaining attention worldwide. However, little information is still available on its possible impacts in the aquatic ecosystems, as well as on the durability of its components. Therefore, this work intends to provide a contribution to this field, analysing possible obstacles that can compromise the performance of this technology, adding to an increase of its reliability and assessing possible impacts.The problem under study is related to the potential submersion of photovoltaic cables, that can lead to a degradation of its electrical insulation capabilities and, consequently, higher energy production losses and water contamination.
Methods: In the present study, the submersion of photovoltaic cables (with two different insulation materials) in freshwater and artificial seawater was tested, in order to replicate real life conditions, when FPV systems are located in reservoirs or in the marine environment. Electrical insulation tests were carried out weekly to assess possible cable degradation, the physical-chemical characteristics of the water were also periodically monitored, complemented by analysis to detect traces of copper and microplastics in the water.
Results: The results showed that the submersion of photovoltaic cables with rubber sheath in saltwater can lead to a cable accelerated degradation, with reduction of its electrical insulation and, consequently, copper release into the aquatic environment.
Conclusions: The test results pointed a probable relationship between submersion of cables with rubber outer shell and water freezing temperatures and the occurrence of accelerated degradation of the cable insulation layer. Reduced insulation resistance values were measured in this cable type after the occurrence of such temperatures, both in salt and freshwater, the cable presented visible exterior degradation signs. For this case copper residues were detected in the water.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11459181 | PMC |
| http://dx.doi.org/10.12688/openreseurope.15122.2 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The swelling mechanism of ethylene-vinyl acetate polymer in different solvents molecular dynamics and experimental studies.
Soft Matter
January 2025
National Engineering Research Center of New Energy Power Generation, North China Electric Power University, Beijing 102206, People's Republic of China.
Ethylene-vinyl acetate (EVA) film is the predominant encapsulation material in crystalline silicon photovoltaic modules, the efficient and eco-friendly processing of which is essential for the recycling of the modules. Among the various existing techniques, the chemical approach uses solvents to induce swelling and dissolution on the EVA film to facilitate the separation of distinct layers. This method demonstrates the potential for achieving low-energy consumption and minimal-damage retrieval of the diverse materials within the components.
View Article and Find Full Text PDFIntermediate-Controlled Synthesis of Quasi-2D (PEA)MAPbI in the 20-30% Relative Humidity Glovebox Environment for Fabricating Perovskite Solar Cells with 1 Month Durability in the Air.
ACS Omega
December 2024
Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, 1001 University Road, Hsinchu 30010, Taiwan.
Herein, quasi-two-dimensional (Q-2D) (PEA)MAPbI (prepared by a two-step process) and hole transport layer of a solar cell were fabricated in a high relative humidity (25 ± 5%) environment. The PSC behavior of most Q-2D perovskites is worse than that of three-dimensional perovskites owing to the horizontal alignment of the innate characteristic organic plates on the substrate. Using hybrid immersion solvents (HISs), we have improved vertical alignment in an appropriate ratio to enhance the efficiency of charge transfer and the high coverage of the first priming layer (first step).
View Article and Find Full Text PDFDual (oxy)hydroxide Cocatalyst Synergistically Boosts Solar Water Splitting of BiVO Photoanode.
Chem Asian J
November 2024
School of New Energy and Materials, Southwest Petroleum University, Chengdu, 610500., P.R. China.
Bismuth oxide (BiVO) is considered one of the most promising semiconductors for photoelectrochemical (PEC) water splitting due to its highly theoretical photocurrent of 7.5 mA cm. However, its sluggish kinetics and severe photocorrosion still hinder the real application of a large-area BiVO photoanode.
View Article and Find Full Text PDFOptimized design of SynRM drive systems for high-efficiency solar water pumps.
Heliyon
October 2024
Bourns College of Engineering, Center for Environmental Research and Technology, University of California at Riverside, Riverside, CA 92521, USA.
This study presents the design and implementation of a Synchronous Reluctance Motor (SynRM) with an integrated drive circuit for a 4-inch submersible pump motor, tailored for small-scale solar photovoltaic water pumping systems. The SynRM operates efficiently at low voltage levels, eliminating the need for a boost converter and allowing direct connection to low-voltage power sources. With a power output of 0.
View Article and Find Full Text PDFOut-of-plane coordination of iridium single atoms with organic molecules and cobalt-iron hydroxides to boost oxygen evolution reaction.
Nat Nanotechnol
January 2025
University of Bayreuth, Chair of Electrode Design for Electrochemical Energy Systems, Bayreuth, Germany.
Advancements in single-atom-based catalysts are crucial for enhancing oxygen evolution reaction (OER) performance while reducing precious metal usage. A comprehensive understanding of underlying mechanisms will expedite this progress further. Here we report Ir single atoms coordinated out-of-plane with dimethylimidazole (MI) on CoFe hydroxide (Ir/(Co,Fe)-OH/MI).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!