Recycled manure solids (RMS) are dried cow dung processed using a manure dewatering machine and subsequently sun-dried to ~ 20% moisture. Benefits of RMS include abundant availability, low cost, and eco-friendliness, but its use as bedding material for cows is hindered by a moisture content that promotes microbial growth. This in vitro study evaluated impacts of calcium hydroxide (CH; 5 and 7.5%) and sodium hydrosulphate (SHS; 6 and 8%), independently and in combinations, at various depths of RMS, on physicochemical and microbial properties. The CH-treated groups had increased pH and reduced moisture on Day 0. Incorporating 7.5% CH + 6% SHS at 15-20 cm, and 7.5% CH + 8% SHS at all depths, effectively suppressed Escherichia coli and Klebsiella spp. Furthermore, a combination of 7.5% CH + 8% SHS at 20 cm inhibited coliform growth, whereas 7.5% CH with 6% SHS inhibited Streptococcus spp. In conclusion, a combination of 7.5% CH with either 6 or 8% SHS at a depth of 15 cm in RMS was particularly effective in controlling environmental mastitis-causing pathogens, specifically E. coli and Klebsiella spp.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11461433 | PMC |
http://dx.doi.org/10.1186/s40643-024-00812-1 | DOI Listing |
Shanghai Kou Qiang Yi Xue
October 2024
Department of General Dentistry, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine; College of Stomatology, Shanghai Jiao Tong University; National Center for Stomatology; National Clinical Research Center for Oral Diseases; Shanghai Key Laboratory of Stomatology; Shanghai Research Institute of Stomatology. Shanghai 200011, China. E-mail:
Purpose: To evaluate the efficacy of micro-computed tomography(Micro-CT) in removing calcium hydroxide from posterior curved root canals.
Methods: Twenty molar teeth (48 root canals) extracted at the Department of General Dentistry, Shanghai Ninth People's Hospital between December 2023 and February 2024 were collected. After preparing by Ni-TI instruments M3 according to standard root canal treatment procedures, calcium hydroxide was injected into the root canals.
J Biomater Sci Polym Ed
December 2024
Polymeric Biomaterials Lab, School of Nanosciences and Molecular Medicine, Amrita Vishwa Vidyapeetham, Kochi, India.
Chitin hydrogel and hydrogel-based products are some of the frequently reported biomaterials for biomedical applications. Yet there is a void in understanding chitin's dissolution mechanism and its most suitable solvent system(s). Chitin is a natural polysaccharide polymer which can be dissolved in solvents such as calcium chloride- methanol, sodium hydroxide/urea (NaOH/urea), lithium chloride diacetamide (LiCl/DMAc), ionic liquids and deep eutectic solvents.
View Article and Find Full Text PDFBeijing Da Xue Xue Bao Yi Xue Ban
December 2024
Department of Pediatric Dentistry, Peking University School and Hospital of Stomatology, Beijing 100081, China.
Objective: To investigate the clinical and radiographic outcomes of 3 years after partial pulpotomy with iRoot BP Plus in immature permanent teeth with complex crown fracture and to provide refe-rence for the clinical application.
Methods: The study was prospectively designed and 104 immature permanent teeth with complex crown fracture were randomly allocated into two groups (=52). The experiment group received iRoot BP Plus as the pulp capping agent while the control group received calcium hydroxide as the pulp capping agent.
Purpose: The purpose of this laboratory study was to evaluate common materials for isolation and neutralizing agents for hydrofluoric acid (HF). Additionally, surfaces of lithium disilicate ceramic were examined for precipitates after the etching and neutralizing process.
Materials And Methods: The HF permeability of the following isolation agents (n=8) was investigated by positioning them over pH indicator paper under airtight conditions and applying 9% HF: latex rubber dam; elastic plastomer rubber dam; nitrile gloves; latex gloves; liquid rubber dam; Teflon; AZ strip.
Int J Mol Sci
December 2024
Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, ks. M. Strzody 9, 44-100 Gliwice, Poland.
Increasing plastic waste generation has become a pressing environmental problem. One of the most produced waste plastics originates from post-consumer packaging, of which PET constitutes a significant portion. Despite increasing recycling rates, its accumulation has created a need for the development of new recycling methods that can further expand the possibilities of recycling.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!