To non-destructively resolve and diagnose the degradation mechanisms of lithium-ion batteries (LIBs), it is necessary to cross-scale decouple complex kinetic processes through the distribution of relaxation times (DRT). However, LIBs with low interfacial impedance render DRT unreliable without data processing and closed-loop validation. This study proposes a hierarchical analytical framework to enhance timescale resolution and reduce uncertainty, including interfacial impedance reconstruction and multi-dimensional DRT analysis. Interfacial impedance is reconstructed by eliminating simulated inductive and diffusive impedance based on a high-fidelity frequency-domain model. Multi-dimensional DRT decouples solid electrolyte interphase (SEI) and charge transfer (CT) processes by the reversibility of electrochemical reactions with state of charge (SOC) to characterize electrode kinetic evolution driven by SOC and temperature through timescales and peak area. The findings reveal that reconstructed impedance improves the accuracy of identified time constants by ≈20%. Cross-scale DRT results reveal that SOCs below 10% at 25 °C effectively distinguish electrode kinetics due to the high correlation between cathodic CT and SOC. Kinetic metrics characterize that anodic SEI or CT are different control steps limiting the low-temperature performance of different cells. This work underscores the potential of the proposed framework for non-destructive diagnostics of kinetic evolution.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11600237 | PMC |
http://dx.doi.org/10.1002/advs.202406934 | DOI Listing |
ACS Appl Mater Interfaces
January 2025
Department of Chemical and Biomolecular Engineering, University of California Los Angeles, Los Angeles, California 90095, United States.
To elucidate interfacial dynamics during electrocatalytic reactions, it is crucial to understand the adsorption behavior of organic molecules on catalytic electrodes within the electric double layer (EDL). However, the EDL structure in aqueous environments remains intricate when it comes to the electrochemical amination of acetone, using methylamine as a nitrogen source. Specifically, the interactions of acetone and methylamine with the copper electrode in water remain unclear, posing challenges in the prediction and optimization of reaction outcomes.
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300400 PR China. Electronic address:
The formation and growth of lithium dendrites is an ever-present and urgent problem in lithium-ion batteries (LIBs). At the same time, the low melting point of commercial polyolefin separators may lead to safety issues during application. On this basis, in this work, poly (m-phenylene isophthalamide) (PMIA)/Zr-based metal-organic framework (NH-UiO-66) composite separator was prepared by non-solvent induced phase separation (NIPS).
View Article and Find Full Text PDFJ Colloid Interface Sci
December 2024
Department of Chemistry, Fu Jen Catholic University, New Taipei City 24205, Taiwan.
A novel metal-organic framework (MOF), (Cu-S)MOF, with a copper-sulfur planar structure was applied to photocatalytic H production application. (Cu-S)MOF@ZnS nanocomposite was synthesized using a microwave-assisted hydrothermal approach. The formation of (Cu-S)MOF and wurtzite ZnS in the composite nanoparticles was analyzed by X-ray diffraction (XRD), field emission-scanning electron microscopy (FESEM), and high-resolution transmission electron microscope (HRTEM).
View Article and Find Full Text PDFEnergy Environ Sci
December 2024
Department of Physics, University of Oxford, Clarendon Laboratory Oxford OX1 3PU UK
It is widely accepted that mobile ions are responsible for the slow electronic responses observed in metal halide perovskite-based optoelectronic devices, and strongly influence long-term operational stability. Electrical characterisation methods mostly observe complex indirect effects of ions on bulk/interface recombination, struggle to quantify the ion density and mobility, and are typically not able to fully quantify the influence of the ions upon the bulk and interfacial electric fields. We analyse the bias-assisted charge extraction (BACE) method for the case of a screened bulk electric field, and introduce a new characterisation method based on BACE, termed ion drift BACE.
View Article and Find Full Text PDFACS Appl Mater Interfaces
December 2024
Key Laboratory of Advanced Materials for Facility Agriculture, Ministry of Agriculture, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, China.
Given the limitations of single-function electromagnetic wave-absorbing materials (EWAMs) in meeting the evolving demands of complex usage scenarios, there is a growing need for structure-function integrated composites that offer a combination of microwave absorption, human monitoring, and thermal insulation. This study successfully synthesized two-dimensional (2D) TiCT MXene via selective etching of Al from the TiAlC MAX phase. By introducing MXene into a composite of hydroxylated CoFeO nanoparticles (-CFO NPs) and bacterial nanocellulose (BNC) to modulate the electromagnetic performance of the EWAMs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!