Square-wave pulsed potential driven electrocatalytic degradation of 4-chlorophenol using Fe-Ni/rGO/PPy@NF three dimensional electrode.

To develop an energy-efficient system for the removal of chlorinated organic pollutants, Fe-Ni/reduced graphite oxide/polymerized polypyrrole@nickel foam was constructed as a catalytic cathode for pulsed electrocatalytic degradation, where cathode-catalyzed production of hydrogen radicals (H*) and hydroxyl radical (·OH) generated at the anode led to dechlorination of 4-chlorophenol (4-CP), and dechlorination products were mineralized and degraded under the action of·OH. When energy was continuously supplied to the reaction system in the constant potential mode, the 4-CP concentration near the electrode was insufficient, limiting the reaction rate. Conversely, in the square-wave pulsed potential mode, mass transfer limitations were mitigated, significantly enhancing reaction efficiency and reducing energy consumption. At -1.2 V (vs. Ag/AgCl), the 4-CP removal efficiency reached 93.79 % in the pulsed potential mode, surpassing the constant potential mode's performance of 81.40 %. The synergistic periodic oscillation of the potential, direct electron transfer, and catalytic generation of active free radicals in the pulsed potential mode reduced intermediate concentrations and increased 4-CP mineralization, while the degradation pathway remained unchanged. This research presents a method for the efficient treatment of chlorinated organic pollutants in water using pulsed electrocatalytic degradation.