Soft robots typically involve manual assembly of core hardware components like actuators, sensors, and controllers. This increases fabrication time and reduces consistency, especially in small-scale soft robots. We present a scalable monolithic fabrication method for millimeter-scale soft-rigid hybrid robots, simplifying the integration of core hardware components. Actuation is provided by soft-foldable polytetrafluoroethylene film-based actuators powered by ionic fluid injection. The desired motion is encoded by integrating a mechanical controller, comprised of rigid-flexible materials. The robot's motion can be self-sensed using an ionic resistive sensor by detecting electrical resistance changes across its body. Our approach is demonstrated by fabricating three distinct soft-rigid hybrid robotic modules, each with unique degrees of freedom: translational, bending, and roto-translational motions. These modules connect to form a soft-rigid hybrid continuum robot with real-time shape-sensing capabilities. We showcase the robot's capabilities by performing object pick-and-place, needle steering and tissue puncturing, and optical fiber steering tasks.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11442515 | PMC |
| http://dx.doi.org/10.1038/s41467-024-51137-8 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Research on the operational properties of the soft gripper pads.
Sci Rep
December 2024
Division of Mechatronic Devices, Institute of Mechanical Technology, Poznan University of Technology, 60-965, Poznan, Poland.
Grippers are commonly used as a technological tooling for manipulators. They enable robots to interact with objects in their work area. Grippers have a wide range of differentiation focused on the operation performed and the properties (e.
View Article and Find Full Text PDFA fabrication strategy for millimeter-scale, self-sensing soft-rigid hybrid robots.
Nat Commun
September 2024
Department of Mechanical Engineering, Boston University, Boston, MA, USA.
Soft robots typically involve manual assembly of core hardware components like actuators, sensors, and controllers. This increases fabrication time and reduces consistency, especially in small-scale soft robots. We present a scalable monolithic fabrication method for millimeter-scale soft-rigid hybrid robots, simplifying the integration of core hardware components.
View Article and Find Full Text PDFSoft-Rigid Hybrid Revolute and Prismatic Joints Using Multilayered Bellow-Type Soft Pneumatic Actuators: Design, Characterization, and Its Application as Soft-Rigid Hybrid Gripper.
Soft Robot
September 2024
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Canada.
Despite the exponentially expanding capabilities of robotic systems with the introduction of soft robotics, the lack of practical considerations in designing and integrating soft robotic components hinders the widespread application of newly developed technology in real life. This study investigates the development and performance evaluation of soft-rigid hybrid (SRH) robotic systems employing multilayered bellow-shaped soft pneumatic actuators (MBSPAs) to overcome the common challenges exclusively exhibited in soft robotics. Specifically, we introduce a unique SRH revolute joint enabled by a single thermoplastic polyurethane-MBSPA and rigid components to tackle the limitations of existing soft pneumatic actuators (SPAs), such as restricted payload capacity, vulnerability to external damages, and lack of resilience against outdoor environment.
View Article and Find Full Text PDF4D Printing Hybrid Soft Robots Enabled by Shape-Transformable Liquid Metal Nanoparticles.
Adv Mater
November 2024
Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD, 4072, Australia.
In recent years, soft robotics has emerged as a rapidly expanding frontier research field that draws inspiration from the locomotion mechanisms of soft-bodied creatures in nature to achieve smooth and complex motion for diverse applications. However, the fabrication of soft robots with hybrid structures remains challenging due to limitations in material selection and the complex, multi-step processes involved in traditional manufacturing methods. Herein, a novel direct one-step additive manufacturing (3D printing) approach is introduced for the fabrication of hybrid robots composed of soft and rigid components for sophisticated tasks.
View Article and Find Full Text PDFExo-Glove Shell: A Hybrid Rigid-Soft Wearable Robot for Thumb Opposition with an Under-Actuated Tendon-Driven System.
Soft Robot
August 2024
Biorobotics Laboratory, Department of Mechanical Engineering/Soft Robotics Research Center (SRRC)/Institute of Advanced Machines and Design (IAMD)/Institute of Engineering Research, Seoul National University, Seoul, Korea.
Usability and functionality are important when designing hand-wearable robots; however, satisfying both indicators remains a challenging issue, even though researchers have made important progress with state-of-the-art robot components. Although hand-wearable robots require sufficient actuators and sensors considering their functionality, these components complicate the robot. Further, robot compliance should be carefully considered because it affects both indicators.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!