In this paper, a novel AlGaN/GaN HEMT structure with a P-GaN buried layer in the buffer layer and a locally doped barrier layer under the gate (PN-HEMT) is proposed to enhance its resistance to single event transient (SET) effects while also overcoming the degradation of other characteristics. The device operation mechanism and characteristics are investigated by TCAD simulation. The results show that the peak electric field and impact ionization at the gate edges are reduced in the PN-HEMT due to the introduced P-GaN buried layer in the buffer layer. This leads to a decrease in the peak drain current () induced by the SET effect and an improvement in the breakdown voltage (BV). Additionally, the locally doped barrier layer provides extra electrons to the channel, resulting in higher saturated drain current () and maximum transconductance (). The of the PN-HEMT (1.37 A/mm) is 71.8% lower than that of the conventional AlGaN/GaN HEMT (C-HEMT) (4.85 A/mm) at 0.6 pC/µm. Simultaneously, and BV are increased by 21.2% and 63.9%, respectively. Therefore, the PN-HEMT enhances the hardened SET effect of the device without sacrificing other key characteristics of the AlGaN/GaN HEMT.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11434552PMC
http://dx.doi.org/10.3390/mi15091158DOI Listing

Publication Analysis

Top Keywords

p-gan buried
12
buried layer
12
locally doped
12
doped barrier
12
barrier layer
12
algan/gan hemt
12
single event
8
event transient
8
novel algan/gan
8
layer
8

Similar Publications

In this paper, a novel AlGaN/GaN HEMT structure with a P-GaN buried layer in the buffer layer and a locally doped barrier layer under the gate (PN-HEMT) is proposed to enhance its resistance to single event transient (SET) effects while also overcoming the degradation of other characteristics. The device operation mechanism and characteristics are investigated by TCAD simulation. The results show that the peak electric field and impact ionization at the gate edges are reduced in the PN-HEMT due to the introduced P-GaN buried layer in the buffer layer.

View Article and Find Full Text PDF

In GaN-based light-emitting diodes (LEDs), tunnel junctions offer a way of replacing the highly resistive p-type GaN (p-GaN) ohmic contact with a low-resistance n-GaN ohmic contact. However, the p-GaN would be re-passivated by hydrogen atoms during the subsequent growth of n-GaN in a metal-organic chemical vapor deposition (MOCVD) chamber. The n-GaN layer, acting as a hydrogen diffusion barrier, hinders the thermal activation of the underlying p-GaN.

View Article and Find Full Text PDF

A better lateral current confinement is essentially important for GaN-based vertical-cavity-surface-emitting lasers (VCSELs) to achieve lasing condition. Therefore, a buried insulator aperture is adopted. However, according to our results, we find that the current cannot be effectively laterally confined if the insulator layer is not properly selected, and this is because of the unique feature for GaN-based VCSELs grown on insulating substrates with both p-electrode and n-electrode on the same side.

View Article and Find Full Text PDF

The combined effects of a few mechanisms for emission efficiency enhancement produced in the overgrowth of the transparent conductor layer of Ga-doped ZnO (GaZnO) on a surface Ag-nanoparticle (NP) coated light-emitting diode (LED), including surface plasmon (SP) coupling, current spreading, light extraction, and contact resistivity reduction, are demonstrated. With a relatively higher GaZnO growth temperature (350 °C), melted Ag NPs can be used as catalyst for forming GaZnO nanoneedles (NNs) through the vapor-liquid-solid growth mode such that light extraction efficiency can be increased. Meanwhile, residual Ag NPs are buried in a simultaneously grown GaZnO layer for inducing SP coupling.

View Article and Find Full Text PDF

While core-shell wire-based devices offer a promising path toward improved optoelectronic applications, their development is hampered by the present uncertainty about essential semiconductor properties along the three-dimensional (3D) buried p-n junction. Thanks to a cross-sectional approach, scanning electron beam probing techniques were employed here to obtain a nanoscale spatially resolved analysis of GaN core-shell wire p-n junctions grown by catalyst-free metal-organic vapor phase epitaxy on GaN and Si substrates. Both electron beam induced current (EBIC) and secondary electron voltage constrast (VC) were demonstrated to delineate the radial and axial junction existing in the 3D structure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!