Although gypsum-based building materials exhibit many positive characteristics, solutions are still being searched for to reduce the use of gypsum or improve the physico-mechanical properties of board materials. In this study, an attempt was made to produce gypsum boards with hemp fibers. Although hemp fibers can be a specific reinforcement for gypsum-based board materials, they negatively affect the gypsum setting process due to their hygroscopic characteristics. Fibers impregnated with derivatives based on polyvinyl acetate, styrene-acrylic copolymer and pMDI (polymeric diphenylmethane diisocyanate) were used in this study. Gypsum-fiber boards produced with impregnated fibers showed approximately 30% higher mechanical properties as determined by the 3-point bending test. The positive effect of the impregnates on the hemp fibers was confirmed by FTIR (Fourier-transform infrared spectroscopy) and TG/DTA (thermogravimetric analysis/thermal gravimetric analysis) analysis.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11433295 | PMC |
| http://dx.doi.org/10.3390/ma17184555 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Microstructural Characteristics of Cellulosic Fiber-Reinforced Cement Composite.
Materials (Basel)
December 2024
Department of Civil and Environmental Engineering, Gachon University, Seongnam 13120, Gyeonggi-do, Republic of Korea.
The microstructural evolution and hydration behaviors of cement composites incorporating three natural fibers (abaca, hemp, and jute) were investigated in this study. Mercury intrusion porosimetry was used to assess the microstructural changes, focusing on the pore-size distribution and total porosity. Additionally, the hydration characteristics were analyzed using setting time measurements and isothermal calorimetry to track the heat flow and reaction kinetics during cement hydration.
View Article and Find Full Text PDFL. Extract Increases COX-1, COX-2 and TNF-α in the Hippocampus of Rats with Neuropathic Pain.
Molecules
January 2025
Physiology Department, Poznan University of Medical Sciences, 6, Święcickiego Street, 60-781 Poznan, Poland.
Inflammation is the critical component of neuropathic pain; therefore, this study aimed to assess the potential anti-inflammatory effects of L. extracts in a vincristine-induced model of neuropathic pain. The effects of different doses (5.
View Article and Find Full Text PDFRare-Earth Pretreatment Improves Performance of Reactive Dye Argazol Navy Blue on Banana-Fiber Fabric.
Molecules
January 2025
Engineering Research Center for Hemp and Product in Cold Region of Ministry of Education, Qiqihar University, Qiqihar 161006, China.
At present, the use of conventional reactive dyes on banana-fiber fabric leads to the problem of excessive salt consumption, which is not conducive to environmental protection. In this experimental study, rare-earth-pretreated banana-fiber fabric was dyed with the reactive dye Argazol Navy Blue. The rare-earth pretreatment was carried out to reduce the level of salt consumption, improve dyeing and fixation rates, and reduce the treatment burden of printing and dyeing wastewater.
View Article and Find Full Text PDFClarification of Bio-Degumming Enzymes Based on a Visual Analysis of the Hemp Roving Structure.
Polymers (Basel)
December 2024
Department of Biotechnology, Institute of Resource Biology and Biotechnology, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China.
Hemp fibers, recognized for their breathability, specific strength, and ultraviolet resistance, are widely utilized in textile manufacturing and composite materials. Bio-degumming is a promising alternative technology to traditional chemical degumming that can be used to produce hemp fibers due to its eco-friendly nature. However, its lower efficiency has hindered its widespread adoption.
View Article and Find Full Text PDFA Study on the Preparation and Performance of Ultrafine Powder Made of Industrial Hemp Degumming Residue.
Polymers (Basel)
December 2024
School of Textile Science and Engineering, Wuhan Textile University, No. 1 Sunshine Avenue, Jiangxia District, Wuhan 430200, China.
Industrial hemp, one of the most widely available and extensively produced varieties, generates a substantial amount of waste in the form of hemp cellulose. This study uses a recycling method combining crushing and acid treatment to convert leftover hemp fiber into ultrafine powder. A scanning electron microscope (SEM), an atomic force microscope (AFM), Fourier transform infra-red spectroscopy (FTIR), and X-ray diffraction (XRD) were used to examine the morphology of acid-treated hemp fiber heated to 200 °C and crushed into powder.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!