In salt lake areas, the cast-in-situ concrete structure has been corroded by the combination of sulfate and chloride for a long time. The incorporation of basalt fiber materials into concrete helps to improve the durability of concrete. In this paper, experiments were conducted to study the corrosion deterioration mechanisms of basalt fiber-reinforced cast-in-situ concrete under sulfate, chloride, and combined attack. The appearance, size, mass, flexural, and compressive strength of specimens were investigated during the immersion period to determine the changes in the physical and mechanical properties of specimens. Moreover, the microstructure and mineral changes of specimens during the immersion period were observed by Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDS), X-ray diffraction (XRD), and Thermogravimetric (TG)/ Derivative Thermogravimetric (DTG) analyses. Results show that premixed chloride has a significant detrimental influence on the strength development of cast-in-situ concrete, with concrete powder spalling occurring on the surface of the specimen. Severe corrosion degradation of specimens occurs under the external sulfate and internal chloride combined attack, resulting in lower flexural and compressive strength. The compressive strength and flexural strength of the corroded specimens decreased by 15.4% and 24.8%, respectively, compared with the control group at 28 days. Moreover, premixed basalt fiber has a beneficial influence on cast-in-situ concrete. When the basalt fiber content is 0.5%, the flexural strength of the specimen is increased by 16.2%. The filling and bridging effect of basalt fiber alleviates the negative effects caused by corrosion. In addition, increasing fiber content is beneficial for enhancing its effectiveness when the fiber content is less than 0.5%. This paper provides a valuable reference for the application of basalt fiber-reinforced cast-in-situ concrete under the condition of sulfate-chloride compound corrosion.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11433526 | PMC |
http://dx.doi.org/10.3390/ma17184454 | DOI Listing |
Sci Rep
November 2024
Department of Civil Engineering, University of Business & Technology, Jeddah, Saudi Arabia.
This paper presents a novel configuration of built-up cold-formed steel (CFS) flooring system in the shape of a box section. A new technique is applied to produce the components of the flooring system, which are fastened by self-drilling screws. This box section consists of a cast-in-situ concrete slab, trapezoidal steel decking, two sigma section, steel plate and stiffening equal angles.
View Article and Find Full Text PDFHeliyon
November 2024
Rose School, Scuola Universitaria Superiore IUSS Pavia, Piazza della Vittoria n.15, 27100, Pavia, Italy.
The seismic design of precast structures hinges on unique characteristics intrinsic to precast technology. Emphasis is placed on lightweight structural elements for efficient on-site assembly and cost reduction. This leads to increased slenderness in beams and columns compared to traditional cast-in-situ constructions, accentuating the role of second-order effects.
View Article and Find Full Text PDFSci Rep
October 2024
Department of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran.
The cast in-situ pile is a widely used type of deep foundations which its execution in civil projects is increasing daily. The use of ordinary concrete in this type of piles causes technical and executive problems, a decrease in the compressive strength (CS) of concrete, and an increase in the permeability under the ground level. But use of the self-compacting concrete in the cast in-situ piles while increasing the CS of concrete ensures proper compaction, increase in the execution speed, and easy placing of concrete.
View Article and Find Full Text PDFMaterials (Basel)
September 2024
School of Highway, Chang'an University, Xi'an 710064, China.
In salt lake areas, the cast-in-situ concrete structure has been corroded by the combination of sulfate and chloride for a long time. The incorporation of basalt fiber materials into concrete helps to improve the durability of concrete. In this paper, experiments were conducted to study the corrosion deterioration mechanisms of basalt fiber-reinforced cast-in-situ concrete under sulfate, chloride, and combined attack.
View Article and Find Full Text PDFMaterials (Basel)
February 2024
School of Highway, Chang'an University, Xi'an 710064, China.
In salt lake areas, cast-in situ concrete structures are subjected to long-term corrosion by sulfate and magnesium ions. The properties of concrete can be improved by adding materials like basalt fiber (BF). To investigate the degradation process and mechanism of cast-in situ concrete with premixed BF under the dual corrosion of sulfate and magnesium salts, concrete with a content of BF ranging from 0 to 0.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!