Low-electrode capacitive deionization (FCDI) is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters. However, it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes, both restricted by the current collectors. Herein, a new tip-array current collector (designated as T-CC) was developed to replace the conventional planar current collectors, which intensifies both the charge transfer and ion transport significantly. The effects of tip arrays on flow and electric fields were studied by both computational simulations and electrochemical impedance spectroscopy, which revealed the reduction of ion transport barrier, charge transport barrier and internal resistance. With the voltage increased from 1.0 to 1.5 and 2.0 V, the T-CC-based FCDI system (T-FCDI) exhibited average salt removal rates (ASRR) of 0.18, 0.50, and 0.89 μmol cm min, respectively, which are 1.82, 2.65, and 2.48 folds higher than that of the conventional serpentine current collectors, and 1.48, 1.67, and 1.49 folds higher than that of the planar current collectors. Meanwhile, with the solid content in flow electrodes increased from 1 to 5 wt%, the ASRR for T-FCDI increased from 0.29 to 0.50 μmol cm min, which are 1.70 and 1.67 folds higher than that of the planar current collectors. Additionally, a salt removal efficiency of 99.89% was achieved with T-FCDI and the charge efficiency remained above 95% after 24 h of operation, thus showing its superior long-term stability.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11436671 | PMC |
http://dx.doi.org/10.1007/s40820-024-01531-0 | DOI Listing |
Adv Mater
January 2025
Materials Science and Engineering Program, Walker Department of Mechanical Engineering and Texas Materials Institute, The University of Texas at Austin, Austin, TX, 78712, USA.
Anode-free all solid-state batteries (AF-ASSBs) employ "empty" current collector with three active interfaces that determine electrochemical stability; lithium metal - Solid electrolyte (SE) interphase (SEI-1), lithium - current collector interface, and collector - SE interphase (SEI-2). Argyrodite LiPSCl (LPSCl) solid electrolyte (SE) displays SEI-2 containing copper sulfides, formed even at open circuit. Bilayer of 140 nm magnesium/30 nm tungsten (Mg/W-Cu) controls the three interfaces and allows for state-of-the-art electrochemical performance in half-cells and fullcells.
View Article and Find Full Text PDFBiopreserv Biobank
January 2025
School of Law, University of Queensland, Brisbane, Queensland, Australia.
Amidst growing international pressure for institutions that collect biological material to comply with the Nagoya Protocol, scientific gatekeepers such as herbaria, funding bodies, and academic journals increasingly request proof of Nagoya Protocol compliance. What happens when research is conducted in a country which does not have a comprehensive regulatory framework implementing the Nagoya Protocol? This article addresses this question through an examination of the difficulties that genetic resource collectors and biobankers may encounter in attempting to voluntarily comply with the Nagoya Protocol in Australia, a country that has not ratified the Nagoya Protocol at a federal level. It summarizes the requirements of the Nagoya Protocol, surveys the legal and regulatory situation that currently exists in Australia, and outlines the difficulties and ambiguities encountered by scientists and biobankers in attempting to navigate this system.
View Article and Find Full Text PDFAdv Mater
January 2025
Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), State Key Laboratory of Advanced Chemical Power Sources, College of Chemistry, Nankai University, Tianjin, 300071, China.
Rechargeable batteries employing Li metal anodes have gained increasing attention due to their high energy density. Nevertheless, low stability and reversibility of Li metal anodes severely impeded their practical applications. Designing current collectors (CCs) with reasonable structure and composition is an efficient approach to stabilizing the Li metal anodes.
View Article and Find Full Text PDFChem Rec
January 2025
Shaanxi Key Laboratory of Catalysis, School of Chemistry and Environment Science, Shaanxi University of Technology, Hanzhong, 723001, China.
Aqueous zinc-ion batteries (AZIBs) are promising options for large-scale electrical energy storage because of their safety, affordability, and environmental friendliness. As an indispensable component of AZIBs, a current collector plays a crucial role in supporting electrode materials and collecting the accumulated electrical energy. Recently, some progress has been made in the study of current collectors for AZIBs; however, only few comprehensive reviews on this topic are available.
View Article and Find Full Text PDFNat Mater
January 2025
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA.
Anode-free solid-state batteries contain no active material at the negative electrode in the as-manufactured state, yielding high energy densities for use in long-range electric vehicles. The mechanisms governing charge-discharge cycling of anode-free batteries are largely controlled by electro-chemo-mechanical phenomena at solid-solid interfaces, and there are important mechanistic differences when compared with conventional lithium-excess batteries. This Perspective provides an overview of the factors governing lithium nucleation, growth, stripping and cycling in anode-free solid-state batteries, including mechanical deformation of lithium, the chemical and mechanical properties of the current collector, microstructural effects, and stripping dynamics.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!